Welcome, Guest. Please login or register.

Author Topic: ScanPlus AGA issue  (Read 1190 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline bradhansen1Topic starter

  • Full Member
  • ***
  • Join Date: Jan 2019
  • Posts: 187
  • Country: us
  • Gender: Male
    • Show all replies
ScanPlus AGA issue
« on: June 18, 2022, 12:54:52 AM »
Hi All, I have installed a ScanPlus AGA in my A1200. I'm running OS3.2.1,
I want to run this on a VGA BENQ flat panel in DBLNTSC HiRes No Flicker.
What I have discovered is that the system will not boot up straight into
this mode. And I must go to the boot screen and and then hit "Return" to
switch to 31kHz and then boot. Question? Is there a setup where I can just
boot into the mode or must I do this everytime?
Appreciate any help.
Brad Hansen
 

Offline bradhansen1Topic starter

  • Full Member
  • ***
  • Join Date: Jan 2019
  • Posts: 187
  • Country: us
  • Gender: Male
    • Show all replies
Re: ScanPlus AGA issue
« Reply #1 on: June 18, 2022, 08:07:02 PM »
Matt, been an Amiga owner since 1988. I don’t know if it’s a hang up of OS3.2.1, but I can not just set my screen
mode to DBLNTSC and have it start up in that mode. my BENQ monitor says”Out of range. It’s only when I switch to
31kHz in the boot screen that it will startup in DBLNTSC. That is how it’s working on the ScanPlus AGA anyway. I have a
TF1230 accelerator and have not noticed any slow down when working in DBLNTSC, which where I want to be.
 

Offline bradhansen1Topic starter

  • Full Member
  • ***
  • Join Date: Jan 2019
  • Posts: 187
  • Country: us
  • Gender: Male
    • Show all replies
Re: ScanPlus AGA issue
« Reply #2 on: June 19, 2022, 11:27:50 PM »
Matt, Thanks for staying on this for me. Your right DBLNTSC is 29.9kHz so that may be why. The ScanPlus
is just plug and play, no preferences or options. I have a raspberry pi 3+ and have setup 5 Amiga systems on
it starting with a 1.3 A500. I’ll stick the VGA Only in there and see what happens. Thanks again.
 

Offline bradhansen1Topic starter

  • Full Member
  • ***
  • Join Date: Jan 2019
  • Posts: 187
  • Country: us
  • Gender: Male
    • Show all replies
Re: ScanPlus AGA issue
« Reply #3 on: June 20, 2022, 07:50:58 PM »
Hi Matt, That worked! Boots up into DBLNTSC no problem, thanks!