Welcome, Guest. Please login or register.
Amiga Kit Amiga Store Iridium Banner AMIStore App Store A1200/A600 4xIDE Interface

AuthorTopic: Long Pin socket Help !~?!  (Read 459 times)

0 Members and 1 Guest are viewing this topic.

Offline KLund1

Long Pin socket Help !~?!
« on: March 28, 2022, 07:24:14 AM »
I need a little help finding replacement machined long 40 pin sockets.
I do not know what these are are called to do a proper search.
I broke off 2 pins and need to solder in a new replacement.
The pins as shown are about 12mm from the PBC and the slimmer end is about 3.5mm(?)
Any help would be much appreciated!!!

Offline AndyFC

A1200 in DIY Tower. 3.2 ROMs, 3.5" HD, CD RW and IDE to SD adapter running off the internal IDE port (using the A4000 4-port IDE adapter from Amigakit), Blizzard 1230-IV, with 32MB 60ns RAM and 50MHz 68882 FPU. 3COM PCMCIA Network card running with Miami DX. https://www.youtube.com/watch?v=1PrGdL6XjmE

MorphOS on PowerMac G5 and ATI 9600 pro

Offline KLund1

Re: Long Pin socket Help !~?!
« Reply #2 on: March 28, 2022, 09:09:34 PM »
Many thanks for the link!!
Very helpful for the info.
The legs on my broken sockets are thin  at then ends. Your link dose not have these.
I think this will be helpful in that the legs only go 'so far' and keep the PCB at the correct height above the other chips.
Is this called something else?
again thanks