Welcome, Guest. Please login or register.

Author Topic: ACA1230-28 ACATune settings help  (Read 1612 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline PinballerTopic starter

  • Newbie
  • *
  • Join Date: May 2014
  • Posts: 14
    • Show only replies by Pinballer
Re: ACA1230-28 ACATune settings help
« Reply #14 from previous page: June 01, 2014, 01:37:32 AM »
I can't explain it.  This morning it crashes.  Haven't touched the software on the card at all, which is weird.

The issue gets worse the longer the unit is turned on.  So it might be a heat problem, although I'm not entirely convinced.  I removed the trap door and felt the surface of the processor on the accelerator card.  It feels warm, but not hot.  

Unfortunately, I don't own a fan, would you believe it.   Is there anything else we can check?  You mentioned timing issues in an earlier post?
 

Offline PinballerTopic starter

  • Newbie
  • *
  • Join Date: May 2014
  • Posts: 14
    • Show only replies by Pinballer
Re: ACA1230-28 ACATune settings help
« Reply #15 on: June 01, 2014, 01:56:13 AM »
UPDATE: I removed the accelerator card and reseated it.  As the system had been sitting powered off for a while, the processor on the accelerator was cool to touch.  So I powered the system back on and it froze early on, seconds into the first game of Rainbow Islands.  Felt the processor again and it was still cool to touch.  Maybe it's a timing issue??