Welcome, Guest. Please login or register.
Amiga Kit Amiga Store Iridium Banner AMIStore App Store A1200/A600 4xIDE Interface

AuthorTopic: Power Supply for A2000  (Read 217 times)

0 Members and 1 Guest are viewing this topic.

Offline bigwall68

Power Supply for A2000
« on: January 27, 2017, 03:00:24 PM »
Anyone looking for one?  I purchased it for a 4000 only to find out its for a 2000.

65 USD (OBO) + shipping + PayPal gift.

Thank you.

Offline Pat the Cat

Re: Power Supply for A2000
« Reply #1 on: January 27, 2017, 07:10:24 PM »
No, but it might help you sell if if you state whether it's 110V AC @ 60 Hz (USA/JAPAN) or 210V-240V @ 50 Hz (Europe/Australia) or 220V @ 60Hz (USA). ;)

I doubt it's the last one, that's a bit more than an Amiga needs. Even an A2000.
"To recurse is human. To iterate, divine."

A1200, Vanilla, Surf Squirrel, SD Card, KS 3.0/3.z, PCMCIA dev
A500, Vanilla, A570, Rev 5, KS 1.2/1.3 Testbench system
Rasp Pi, UAE4ARM, 3D laser scanner, experimental, hoping for AmigaOS4Arm, based on Watterott Fabscan Pi

Offline bigwall68

Re: Power Supply for A2000
« Reply #2 on: January 27, 2017, 07:22:55 PM »
110V AC @ 60 Hz (USA/JAPAN).  Thanks.

Offline Oldsmobile_Mike

Re: Power Supply for A2000
« Reply #3 on: January 27, 2017, 08:16:11 PM »
You might want to put where you're located, whether it's new or used, replacement caps, even a picture (since there's different models).  Couldn't hurt, in any case.  Good luck with your sale!  :)
Amiga 500: 2MB Chip|16MB Fast|30MHz 68030+68882|3.9|Indivision ECS|GVP A500HD+|Mechware card reader + 8GB CF|Cocolino|SCSI DVD-RAM
Amiga 2000: 2MB Chip|136MB Fast|50MHz 68060|3.9|Indivision ECS + GVP Spectrum|Mechware card reader + 8GB CF|AD516|X-Surf 100|RapidRoad|Cocolino|SCSI CD-RW
 Amiga videos and other misc. stuff at https://www.youtube.com/CompTechMike/videos