|
|
| work in progress..... | ||
 |
||
| Previous Image | Next Image | ||
|
Description: Still work to be done :lol: One soundcard to go and an X-surf II My first experience with an A4000 and a messy one :-D Picture Stats: Views: 2377 Filesize: 264.67kB Height: 768 Width: 1024 Posted by: Amigaz at March 20, 2005, 09:48:25 AM Image Linking Codes
|
||
| 0 Members and 1 Guest are viewing this picture. |
| darksun9210 Posts:1317 | October 10, 2008, 08:33:08 AM and you've got the proper half height floppy drive in there so you can fit drives with normal sized front face plates. nice :-D |
| TheMud Posts:372 | December 22, 2006, 11:40:17 AM Quite messy... But Good...  |
| Syperhawk Posts:23 
| August 21, 2006, 07:40:55 PM Kinda looks like my A4000D ========================== A4000D 060/50 CV64/64 RAM =========================== |
| Amigaz Posts:1959 | March 23, 2005, 11:31:56 AM The one in the upper left corner is a heav duty PSU from Micronik. Use it mainly with my A600 '030 and A500+ '030 |
| DethKnight Posts:509
| March 22, 2005, 06:03:09 PM whats with the external power brick |
| Amigaz Posts:1959 | March 21, 2005, 11:22:03 AM Almost right, it's a Cs MKII '060 which I couldn't get to ork in my A3000 due to that it's one of the boards that had the DMA issue. The board that was in this A4000 was a CS MKII '040 which I'm using in my A3000 now. There's also a Micronik Scandoubler card hiding under the MFC3 which I've now removed at inserted a Prelude soundcard instead. Spent an hour yesterday trying to get some sound out of the Prelude, now have sound on some games  Next step is o insert my X-surf II card but I have to remove the cable and connector from the MFC3 which takes up one slot...then this A4000 is loaded! Also have to get the Cyberscsi module working, I don't have a SCSi drive which isn't amiga bootable so when I connect both my IDe HDD and SCS hdd they both have the same boot priority and I can't get into the early startup meny and change the boot priority. Have some cool newer games I want to run on this machine but I've only managed to get Nightlong to run so far (Freespace, Quake II has some issues) it runs sluggish bu that must be because I'm using the nboard IDe controller which is a big bottleneck. |
| adolescent Posts:3056 | March 20, 2005, 08:41:50 PM Looks like a nice start. I see a CV643d, MFC3, and what looks like a CSMK3. Anything else I missed? |