New Smaller HxC SD Card Floppy Emulator Preorder

[Jeff_HxC]

Important update of the SD HxC Floppy Emulator for Amiga users:

-> Write support added for Amiga !

Quote:
22/08/2010: Firmware SD HxCFloppyEmulator v1.3.0.0
- Amiga Write support added :

Note to the Revision B PCB owners :

To activate this new features you need to add a Microchip 23K256 SPI SRAM chip and 4 resistors.
The connection to do is :

23K256 pin 1 -> 220ohms resistor -> PIC18F4620 pin 22
23K256 pin 5 -> 220ohms resistor -> PIC18F4620 pin 27
23K256 pin 6 -> 220ohms resistor -> PIC18F4620 pin 28
23K256 pin 2 -> 220ohms resistor -> PIC18F4620 pin 29
23K256 pin 8 & 7 -> VCC3.3V (this voltage can be found at the capacitor under the sdcard connector or at the output of the regulator)
23K256 pin 4 -> GND
23K256 pin 3 -> Not connected.

(a 100nF capacitor is also recommended at the pin 8 of the 23K256)

After this modification you should see the message "SRAM OK" at power up.


More infos here:

http://hxc2001.free.fr/floppy_drive_emulator/index.html#SDCARDFloppyemulator

[Jeff_HxC]

Hi,

Finally i managed to port the file selector software to Amiga:




Rev B & C Hardware are supported. You have just to get the lastest firmware update and file selector software on the project website:

http://hxc2001.free.fr/floppy_drive_emulator/index.html#download

[Jeff_HxC]

Hi,

A small video demo of SD Card HxC Floppy Emulator used with the file selector software:





http://www.youtube.com/watch?v=p1zP6p9SBLw

Project webpage:
http://hxc2001.free.fr/floppy_drive_emulator/

Producer webpage:
http://www.lotharek.pl/

[Jeff_HxC]

Hi

New Rev C SD HxC Floppy Emulator Preorder :

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=180592972686

and a new webstore is now open :

http://www.lotharek.pl/

http://lotharek.pl/null/product/info/3


Project webpage :

http://hxc2001.free.fr/floppy_drive_emulator