Hello all,
Ive been working with my amiga in a stock hardware mode so that there are no external issues here. No ACA500+ or anything like that. Just a 68000.
Installed is a Baseboard expansion BB504A rev 1.2 with Floppy boot and install software version 1.7
Motheeboard rev is 6A
Agnus chip is 8372A 318069-02 [ECS?] FAT AGNUS? or FATTER?
ROM jumper on baseboard is set for 1.3
JP2 on the motherboard is set to 2-3 [the center to forward connected]
Jumper on Baseboard is set to FAT
both Jumpers on sidecar board set to FAT
Sidecar board is 885048 rev 1.1
Fully populated with HY534256S-80 9142A in every ram socket
memcheck ran on this configuration shows no errors, just FYI
Now..... If I run the Cram program either in boot or stand alone from the cli. It says something like " 524280 added to chipram" and crashes, if I set the boot program to fat instead of fatter it loads fine but doesnt add the extra 512
is the motherboard jumper wrong for this agnus???