|
M-Tec AT 500 Megabody - Cracked Solder Joint | ||
Previous Image | Next Image | ||
Description: This is a close up of IC9 on my Megabody IDE controller. I purchased this card as working, but work it did not. Here's the culprit - a cracked solder joint on the front right leg. If you notice, you'll see that the whole IC slants down to this corner and there is damage to the IC casing on the same corner. With the other marks on the board visible, it can be seen that the previous owner was quite heavy handed when removing the CPU. Also note the melted plastic to the right of this IC. Had someone re-soldered it before me? After repair, it is now working. I am going to hopefully put together a nice retro A500 with Kickstart 1.3. I am currently testing other components for the build. Picture Stats: Views: 998 Filesize: 358.79kB Height: 768 Width: 1024 Posted by: paul1981 at March 06, 2017, 04:39:04 PM Image Linking Codes
|
||
0 Members and 1 Guest are viewing this picture. |