Welcome, Guest. Please login or register.

Author Topic: A3000D and Fastlane Z3  (Read 1772 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline pankaujnTopic starter

  • Newbie
  • *
  • Join Date: Apr 2008
  • Posts: 9
    • Show only replies by pankaujn
A3000D and Fastlane Z3
« on: March 24, 2009, 09:51:14 PM »
I recently acquired a Fastlane Z3 for my Amiga 3000D.  I am running WB3.1 with 3.1 ROMs and a Rev Buster chip.  I've installed the card easy enough but am having trouble with setting up the software and getting it recognized.  Anyone out there with experience on setting this up?

Jim
 

Offline Zac67

  • Hero Member
  • *****
  • Join Date: Nov 2004
  • Posts: 2890
    • Show only replies by Zac67
Re: A3000D and Fastlane Z3
« Reply #1 on: March 24, 2009, 10:02:27 PM »
The RAM should get recognized right away, the SCSI part requires a Super Buster 9+ for the DMA.
 

Offline Crusher

  • Sr. Member
  • ****
  • Join Date: Aug 2002
  • Posts: 385
    • Show only replies by Crusher
    • http://www.hast-enterprises.se
Re: A3000D and Fastlane Z3
« Reply #2 on: March 24, 2009, 11:22:16 PM »
Well, good luck if you get it going in an A3000. I have 3 FastlaneZ3 and none of them work, the scsi that is. Memory works fine though. Haven´t got around to test in an A4000 yet.
I have SB 11 and scsi-patch in all my A3000´s.  :-)
Mainframe: Amiga 3000 Tower, CSPPC233/060, 144+2MB, 36GB UW, Prometheus, Voodoo5 5500, 10Mbit, 24xCDr, OS 4.0 ....Amiga since 1987.