Welcome, Guest. Please login or register.

Author Topic: A1200 accelerators - all have timing issues??  (Read 4633 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline Lurch

  • Lifetime Member
  • Hero Member
  • *****
  • Join Date: Dec 2003
  • Posts: 1716
    • Show all replies
Re: A1200 accelerators - all have timing issues??
« on: June 01, 2014, 07:53:25 AM »
Mainly the ACA accelerators... old meeting new clashing. Some 060 accelerators also have issues.

The other thing to get done is the caps at the same time. Amigakit offer a good service to have this done.

It's not the accelerators at fault but it's showing up faults in the Amiga 1200 boards.
-=[LurcH]=-
A500 Plus Black 030@40MHz 128MB | A1200T 060@80MHz 320MB | Pegasos II G4@1GHz 1GB  | Amiga Future Sub
 

Offline Lurch

  • Lifetime Member
  • Hero Member
  • *****
  • Join Date: Dec 2003
  • Posts: 1716
    • Show all replies
-=[LurcH]=-
A500 Plus Black 030@40MHz 128MB | A1200T 060@80MHz 320MB | Pegasos II G4@1GHz 1GB  | Amiga Future Sub
 

Offline Lurch

  • Lifetime Member
  • Hero Member
  • *****
  • Join Date: Dec 2003
  • Posts: 1716
    • Show all replies
Re: A1200 accelerators - all have timing issues??
« Reply #2 on: June 01, 2014, 07:58:12 AM »
See my second post above :-) All ACA, some Apollo's and Blizzards but less likely.

If the motherboard is already re capped then just need the timing fixes.

Older accelerators are mostly fine.
-=[LurcH]=-
A500 Plus Black 030@40MHz 128MB | A1200T 060@80MHz 320MB | Pegasos II G4@1GHz 1GB  | Amiga Future Sub
 

Offline Lurch

  • Lifetime Member
  • Hero Member
  • *****
  • Join Date: Dec 2003
  • Posts: 1716
    • Show all replies
Re: A1200 accelerators - all have timing issues??
« Reply #3 on: June 01, 2014, 10:19:06 AM »
Had an ACA card and a 1200, would red screen on occasion. Hang and lock-up. Had the timing fixes applied now it's rock solid.

So not a myth.
-=[LurcH]=-
A500 Plus Black 030@40MHz 128MB | A1200T 060@80MHz 320MB | Pegasos II G4@1GHz 1GB  | Amiga Future Sub