Amiga.org
Amiga computer related discussion => Amiga Software Issues and Discussion => Topic started by: klx300r on January 21, 2023, 03:57:11 AM
-
Q over at Hold and Modify on YouTube just posted a Lightwave Raytrace Scene benchmark and I absolutely love this type of stuff so if you're interested please follow the link below to follow the simple steps to run the benchmark and post your results & system specs (https://www.amigans.net/uploads/smil3dbd4e5e7563a.gif) (https://www.amigans.net/uploads/smil3dbd4e4c2e742.gif)
Hold and Modify Lightwave3D Benchmark Raytrace Scene! (https://www.youtube.com/watch?v=x4fJ2kDNJj4)
For those that don't want to watch the whole vid here's the quick setup:
1- File-Load Scene-Benchmarks folder-choose Raytrace scene
2- Camera Panel- set to low resolution- set to square pixels
3- click Render or hit F9
Q's system results:
A3000, Phase5-MKII (060@50), OS3.2.1- 52m24s
A1200, TF1260 (060@50)128MB, OS3.2.1-54m22s
A4000, BFG060 (rev5) 060@50, 128MB, OS3.2.1- 43m46s
A2500, PP&S (040@25), OS3.3.2.1- 2h2m8s
-
A4000, CS-MKIII, 060@50 (Rev1), OS3.2.1- 47m21
A1200, TF1260, 060@50 (Rev1), OS3.2.1- 51m48
-
A1200, M-Tec 030@50, 32MB Fast- 5h21m2s
-
from YouTube thread:
AmigaONE X5000/020-PPC-OS4.1FE- 3m27s
-
Anyone tried UAE ?
-
I can't get the render screen to play nice to render the scene via LW but using Shell via ScreamerNet to render as per walkero over at amigans instructions:
AmigaONE X1000, PPC, OS4.1FE- 17m10s
BUT this is not comparing apple to apples though as per the steps from post 1but still cool to try.
To do so make sure your using v5, open Shell and type:
xx:xx/Lwsn.fp -3 scenes/benchmark/Raytrace.lws 0 0 (x is location of your Lightwave folder)
-
man, i just wasted 16 minutes of my life rendering the Benchmark twice, before i realised the scene to render is a different one not named Benchmark and i don't have it.
???
-
Amiga 1200, PiStorm32 with Raspberry Pi3a+ (March 10/23 firmware), Amiga OS3.2.2
5m59sec