Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: bomrat on March 30, 2018, 06:53:44 PM

Title: rapid road usb clockport version
Post by: bomrat on March 30, 2018, 06:53:44 PM

hi, i am thinking of getting the rapid road for my a1200
i have the aca1233n accelerator and rtc addon.
if i connect the rapidroad to the accellerator. can i plug the rtc to the onboard clockport.. or can / need a clockport splitter...

thanks

Title: Re: rapid road usb clockport version
Post by: Oldsmobile_Mike on March 30, 2018, 08:26:22 PM

Depends on your version of A1200 motherboard.  Some of them don't have the pins in the correct places (would require desoldering or adding new pins), AFAIR.  Most likely you'd be fine though.  ;)

See last section on this page:  http://www.ianstedman.co.uk/Amiga/amiga_h_w/clock_port/clock_port.html

Title: Re: rapid road usb clockport version
Post by: Toddles on April 02, 2018, 12:21:32 AM

Sorry to hijack the thread but has anyone else had issues with these? I 've bricked two of them, connected directly to the clockport and worked flawlessly for about 3 months just with usb memory sticks then the next day dead with no red led on the board. nothing against IC as the Indivision AGA is great.