Welcome, Guest. Please login or register.

Author Topic: Hyperion: "Halloween special double-treat for the Classic AmigaOS"  (Read 37417 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline Pat the Cat

Quote from: kenny smith;818472
Hi everyone, i use 3.1 workbench. I want to know how big of a hard drive can use this drive size 2.1Gb and 2.15 Gb hard drive. But i am useing a gvp controller card my computer is useing a 68040 Cpu. How can i get a set of those disk?. Can you mail me the set to this address
Kenny smith
10460 EL Mercado Dr Apt 67
Rancho Cordova ca 94670 usa.

Theoretical limit for your boot partition is 4GB, under 3.1. You can have extra partitions, but the max limit for those is 8GB.

It makes sense to use a little less than the maximum limit.

GVPTools is what you seek, same software for all GVP SCSI controllers... BUT... some of them have 68040s, and most don't.

Even with a ROM upgrade to 3.9, you will still be limited to an overall maximum of about 128GB for total drive size.

It is a bit difficult to answer WHICH vesion of GVP software you need without more information about your setup - which Amiga? Which GVP expansion?

For instance, is the SCSI interface part of the 68040 accelerator card, or is a separate card?

It makes a difference, as there is no point posting links to stuff that is irrelevent to your needs.
"To recurse is human. To iterate, divine."

A1200, Vanilla, Surf Squirrel, SD Card, KS 3.0/3.z, PCMCIA dev
A500, Vanilla, A570, Rev 5, KS 1.2/1.3 Testbench system
Rasp Pi, UAE4ARM, 3D laser scanner, experimental, hoping for AmigaOS4Arm, based on Watterott Fabscan Pi
 

Offline Pat the Cat

Re: Hyperion: "Halloween special double-treat for the Classic AmigaOS"
« Reply #1 on: December 31, 2016, 03:31:19 PM »
Quote from: LoadWB;816151
Does anyone know if the Winbond W29C040 can be used to hold a Kickstart for the 500/2000 as a drop-in replacement for a 512k EPROM?

Chip can hold the data but will not physically fit, as it is not a DIL (Dual InLine) package.

It is available in TSOP and PLCC form, but not DIL, sometimes called DIP (DualInlinePackage).
"To recurse is human. To iterate, divine."

A1200, Vanilla, Surf Squirrel, SD Card, KS 3.0/3.z, PCMCIA dev
A500, Vanilla, A570, Rev 5, KS 1.2/1.3 Testbench system
Rasp Pi, UAE4ARM, 3D laser scanner, experimental, hoping for AmigaOS4Arm, based on Watterott Fabscan Pi
 

Offline Pat the Cat

Re: Hyperion: "Halloween special double-treat for the Classic AmigaOS"
« Reply #2 on: December 31, 2016, 07:36:27 PM »
Quote from: LoadWB;818550
I have ten of them in DIP form-factor sitting here which would disagree with you.  In the TI world there is a special setting on the home-brew cart boards which are required to make it work similarly to a 512k EPROM.  My guess is the 500/600/2000 have the same problem and it won't be a drop-in replacement.  If no one else has tried it I will have to at some point in the near future.  I will make one using the purchased ROM files, though I would rather build my own.

Don't shoot the messenger if the datasheet is plain wrong.
"To recurse is human. To iterate, divine."

A1200, Vanilla, Surf Squirrel, SD Card, KS 3.0/3.z, PCMCIA dev
A500, Vanilla, A570, Rev 5, KS 1.2/1.3 Testbench system
Rasp Pi, UAE4ARM, 3D laser scanner, experimental, hoping for AmigaOS4Arm, based on Watterott Fabscan Pi
 

Offline Pat the Cat

Re: Hyperion: "Halloween special double-treat for the Classic AmigaOS"
« Reply #3 on: December 31, 2016, 07:38:02 PM »
Quote from: LoadWB;818551
as Gold Five says: "Stay on target."

Shortly before being blown out of the sky, as I recall. :)

But yeah, OK, it started as a necropost and went pear shaped very quickly. Fair play.
"To recurse is human. To iterate, divine."

A1200, Vanilla, Surf Squirrel, SD Card, KS 3.0/3.z, PCMCIA dev
A500, Vanilla, A570, Rev 5, KS 1.2/1.3 Testbench system
Rasp Pi, UAE4ARM, 3D laser scanner, experimental, hoping for AmigaOS4Arm, based on Watterott Fabscan Pi