SAM 460ex
FlexATX Motherboard w/ SoC AMCC 460ex CPU
The SAM460ex is the third modular motherboard produced by ACube Systems Srl (see also
SAM440ep Flex).
The core of the Sam 460ex board is the PowerPC 460ex, a System On Chip (SoC) produced by AMCC under license from IBM. The 460ex can be clocked up to 1.166 GHz.
Technical data:
[*]flex-ATX form factor (21.6 cm x 17 cm)
[*]8 layers PCB
[*]AMCC 460ex SoC - up to 1.166 Ghz
[*]max 2 GB DDR2 RAM - 200-pin SODIMM up to 533 Mhz
[*]Silicon Motion SM502 embedded MoC (audio/video) max 64 MB Gfx RAM
[*]Audio 5.1 Realtek ALC655 codec
[*]PCI-express 4x lanes slot (16x mechanical connector)
[*]PCI-express 1x lane slot (*)
[*]PCI slot, 32 bit, 66/33 Mhz, 3.3V
[*]1x SATA2 port (*)
[*]6x USB2 EHCI/OHCI ports
[*]1x 10/100/1000 Ethernet port (another GigaEthernet is optional)
[*]Lattice XP2 FPGA with 80 I/O pins expansion connector (optional)
[*]UMTS/GSM module (optional, requires add-on card)
[*]512 MB NAND Flash (optional)
[*]integrated SD USB card reader
[*]RTC clock
[*]Serial port, 8 wires
[*]I2C and SPI/I2C buses
[*]passive cooling (only on low speed CPUs)
[*]U-Boot 2010.06
[/LIST]
* Please note: The SATA2 port and the PCI-e 1x slot are mutually exclusive, only one of them can be used at a time.
Please use the configuration options to select memory, graphics card (optional), and a SATA controller (strongly recommended).
Current state of the SAM460ex version of
AmigaOS 4.1:
The version currently shipped with the Sam460ex board is still to be considered beta. It is made from AmigaOS 4.1 Update 2 to which specific components for Sam460ex were added. You can download the next AmigaOS update when it is available from Hyperion Entertainment.
The current RadeonHD driver supports the following chipsets with full 2D hardware acceleration and DDC:
[*]R500 (with compositing support) - Radeon X1550, X1650, X1950 and others
[*]R600 - Radeon HD 2400 - HD 3450 - HD 3650 and others
[*]R700 - Radeon HD 4350 - HD 4650
[/LIST]
The audio driver is missing, but will be released on
OS4Depot as soon as it is done.
The driver for the onboard SATA port is still experimental (and hence it is not loaded by the Kicklayout file by default). We recommend to buy an inexpensive SATA controller card together with the board (see configuration options), this way you avoid the problems you could encounter with the experimental driver and, as an additional benefit, have more SATA ports at your disposal.
EUR 858.90 incl. 19% German VAT (EUR 721.76 excl. VAT for non-EU customers)
More...
