« Reply #9 on: January 12, 2019, 04:24:17 AM »
I'd put lavender in my bath if it wasn't the side car socket.
Or, you might experience instability with ANY expansion card connected to the side car socket as maybe the socket is fine at the frontend, but the problem lies from the back of the socket to anywhere on the motherboard that handles signals from the expansion port.
Let's think about this.... time and money for a DiagROM or checking continuity from the back end of the connector to pretty much everywhere on the motherboard.
I would A) go for the DiagROM or, B) replace the expansion connector, or C) spring for a Rev6 motherboard.
BTW, do you know what revision motherboard you have? Let us know as the rev might give an additional clue.
Yo smerf, good to see you post up!!!!
« Last Edit: January 12, 2019, 03:48:41 PM by giZmo350 »
Logged
A500: 2MB Chip, 8MB Fast, IndiECS, MiniMegi, IDE4ZorroII on Z-500, KS1.3/KS3.1, WB3.1&BWB
A2000HD: 2MB Chip, 128MB Fast, P5:Blizz 2060@50MHz, PCD-50B/4GBCF, XSurf100, RapidRoad, IndiECS, Matze RTG, MiniMegi, CD-RW, SunRize AD516, WB3.9
A1200: 2MB Chip, 64MB Fast, 4GBCF, GVP Typhoon 030 @40MHz w/FPU, Subway USB, EasyNet Ethernet, Indi AGA MKI, FastATA MK-IV, Internal Slim CD/DVD-RW, WB3.5
Surfing The Web With AMIGA Is Fun Again!