I recently watched the video on...
https://www.youtube.com/watch?v=u5ixZhIxMus This is about buying old PC graphics tablets and using them with an Amiga by adding adapters and a special driver.
I ended up buying an Aiptek Hyperpen 6000 tablet which was new old stock, complete with some old AAA batteries still in shrink wrapped plastic packaging, especially because this model has been described as definitely Amiga compatible.
![](http://)
I bought this tablet from eBay, because I wasn't able to find any other tablet mentioned in the video. There were lots of old Wacom tablets available, but it wasn't clear which ones would work. I didn't like the advice that MOST Wacom Serial tablets would work, apart from Intuos models.
I plan to use this tablet with Deluxe Paint, although the video doesn't recommend this, due to lack of pressure sensitivity. I have only ever used Deluxe Paint with a mouse before, so this doesn't matter to me.
So far, I've bought a 9 pin serial to 25 pin serial adapter, as well as a PS/2 to USB adapter. I inserted a recently bought AAA battery into the pen, I booted up my Amiga with the Aiptek tablet plugged in to the Serial port, then I connected it to the mains and a light on the tablet next to where it says F1 lit up. This was all I was expecting to happen at this stage. I need to install the FormAldiHyd driver from Aminet to get it to work. Unfortunately, when I was testing the pen that came with it, which has no wired connection to the tablet, the tip which makes contact with the tablet got depressed and pushed in, but now won't return to its previous extended position. I hope I haven't broken it. There is no light on the pen. I don't understand why it requires a battery. I can't see how it would transmit any data wirelessly. It also comes with a battery powered 3 button mouse, but I don't see any point in using this, because the whole point is to get away from drawing with a mouse.
As for installing the driver, I have downloaded it from Aminet onto my MacBook and copied it onto a FAT32 formatted CF card. I recently installed FS-UAE, but I haven't used it recently. I found that it couldn't detect either of my AmigaOS CF cards, which are in SFS and PFS formats. I set these cards up using Linux.
Can anyone give me any advice about completing this setup and what might go wrong? Unfortunately, the artist Mixel who made the video hasn't replied to a question of mine from a few weeks ago.