Welcome, Guest. Please login or register.

Author Topic: Cyberstorm MKII not recognizing Zorro alots  (Read 1363 times)


0 Members and 1 Guest are viewing this topic.

Offline pvanbTopic starter

  • Newbie
  • *
  • Join Date: Jul 2009
  • Posts: 5
    • Show only replies by pvanb
Cyberstorm MKII not recognizing Zorro alots
« on: March 19, 2021, 04:43:30 AM »
Hi all...

My CS MK2 060 @ 50 will no longer recognize Zorro slots after a MK2UpDate fail. It still boots fine from floppy and IDE HD on the A4000, and seems to run fine otherwise.

Is there a way to flash the ROM, or send it to someone that is able to? Perhaps an IC replacement?

Thanks, and keep Amiga-ing

Offline Pat the Cat

Re: Cyberstorm MKII not recognizing Zorro alots
« Reply #1 on: March 24, 2021, 03:09:45 PM »
Check your serial number?

CyberStorm 060 SN# B002827 - B003065 are affected by several DMA related problems due to a slight difference in the electrical specifications of certain parts caused by supplier change

The unit appears ROM updateable, I guess your issue is you want the old one back. I don't know if it's contained on any of the downloadble content at;-


"To recurse is human. To iterate, divine."

A1200, Vanilla, Surf Squirrel, SD Card, KS 3.0/3.z, PCMCIA dev
A500, Vanilla, A570, Rev 5, KS 1.2/1.3 Testbench system
Rasp Pi, UAE4ARM, 3D laser scanner, experimental, hoping for AmigaOS4Arm, based on Watterott Fabscan Pi