Welcome, Guest. Please login or register.
Amiga Kit Amiga Store Iridium Banner AMIStore App Store A1200/A600 4xIDE Interface


Ultra 160 SCSI Hard Disk going in my A4000D
Ultra 160 SCSI Hard Disk going in my A4000D
Previous Image | Next Image
Description: 10,000 RPM Ultra 160 SCSI Drive which is going into my A4000.
Picture Stats:
Views: 1107
Filesize: 68.84kB
Height: 768 Width: 1024
Posted by: Quagmire at September 29, 2008, 11:18:38 PM

0 Members and 1 Guest are viewing this picture.

Comments (6)

October 04, 2008, 07:03:31 AM
The jumper settings really depend on the type of scsi controller.  I believe you need to put a jumper on the motor enable, termination enable and termination power jumpers on LVD drives to get them to work with the cyberstorm scsi.
September 30, 2008, 11:23:28 PM
Hmmm mine is also a Fujitsu, but it is 36gb. It came out of an HP workstation. I'll try those jumper settings, then make a thread if I don't win.
Thanks for jumper info!
September 30, 2008, 05:04:31 PM
It's not as noisy as the stock IDE drive I ripped from the A4000, that thing sounded like an angle grinder :lol: and the speed. oh yeah it's worth it :-)
September 30, 2008, 04:29:10 PM
Is the noice worth the speed?
September 30, 2008, 12:02:37 PM
sure I've used it before with a cyberstotm MK3 and it's fine, This one's a Fujitsu 18GB :-) the jumpers are: holding the drive upside down with the connectors away from you.

hope this helps
September 30, 2008, 08:14:21 AM
Can you tell me what jumper settings you will use: I have a drive similar to that, that the CyberPPC SCSI can't detect.

Powered by: SMF Gallery