Welcome, Guest. Please login or register.
Amiga Kit Amiga Store Iridium Banner AMIStore App Store A1200/A600 4xIDE Interface

AuthorTopic: a1200 tower  (Read 554 times)

0 Members and 1 Guest are viewing this topic.

Offline orange

a1200 tower
« on: May 31, 2021, 08:10:37 PM »
I had put a1200 into big tower (for ppc cooling) , but that case takes a LOT of space.
I'd like to put it into smaller one, or even better, desktop.
Any reccomendations?
Thanks.
Better sorry than worry.
 

Online AndyFC

Re: a1200 tower
« Reply #1 on: June 01, 2021, 09:34:24 PM »
The A1200 has quite a wide mobo so I use a tall case especially as I used to have an Alfa Data cd controller in the pcmcia port so needed the height.

For standard ATX cases a short tower will take roughly as much floor space as a tall tower.

What else do you have connected that you need to accommodate?
A1200 in DIY Tower. 3.2 ROMs, 3.5" HD, CD Rom and IDE to SD adapter running off the internal IDE port (using the A4000 4-port IDE adapter from Amigakit), Blizzard 1230-IV, with 32MB 60ns RAM and 50MHz 68882 FPU. 3COM PCMCIA Network card running with Miami DX. https://www.youtube.com/watch?v=1PrGdL6XjmE

MorphOS on PowerMac 1 GHz G4 MDD, with Radeon 9000 GPU.
 

Offline orange

Re: a1200 tower
« Reply #2 on: June 02, 2021, 06:48:47 PM »
thanks.
I have a pcmcia ethernet card. iirc, amikit or someone used to sell 90deg adapter, but that would probably require too wide case then?
perhaps 180deg adapters exist. anyway those adapters aint cheap.

I also have bvision.
« Last Edit: June 02, 2021, 06:49:36 PM by orange »
Better sorry than worry.
 

Offline goldfish

Re: a1200 tower
« Reply #3 on: June 03, 2021, 11:10:12 PM »
 

Offline Gryfon

Re: a1200 tower
« Reply #4 on: June 04, 2021, 12:03:26 PM »
I wanted one of those Elbox towers for a long long while...
The Elbox website says it's discontinued BTW - does anyone know of any other vertical towers for 1200 motherboards which are still available?
\\"We should take off and nuke the entire site from orbit.  It's the only way to be sure.\\" Ripley, Aliens
 

Offline goldfish

Re: a1200 tower
« Reply #5 on: June 04, 2021, 09:07:00 PM »
Hi

Are you local to sudbury suffolk area. I have the older style tower case by elbox for sale ifyour interested
 

Online AndyFC

Re: a1200 tower
« Reply #6 on: June 04, 2021, 10:14:49 PM »
thanks.
I have a pcmcia ethernet card. iirc, amikit or someone used to sell 90deg adapter, but that would probably require too wide case then?
perhaps 180deg adapters exist. anyway those adapters aint cheap.

I also have bvision.

I don't know much about bvision but your comment about 180 degree adapters got me thinking...although expensive could two 90 degree adapters be connected to make a 180 degree one?
A1200 in DIY Tower. 3.2 ROMs, 3.5" HD, CD Rom and IDE to SD adapter running off the internal IDE port (using the A4000 4-port IDE adapter from Amigakit), Blizzard 1230-IV, with 32MB 60ns RAM and 50MHz 68882 FPU. 3COM PCMCIA Network card running with Miami DX. https://www.youtube.com/watch?v=1PrGdL6XjmE

MorphOS on PowerMac 1 GHz G4 MDD, with Radeon 9000 GPU.