Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: clusteruk on October 16, 2010, 03:05:42 PM

Title: VLab Motion 1.1 card software needed with Movie shop if possible
Post by: clusteruk on October 16, 2010, 03:05:42 PM
Hi, just got hold of a Macro System VLab Motion v1.1 card without software for my A3000.

Does any body have ADF copies of this software please.

Steve
steve at imica dot net
Title: Re: VLab Motion 1.1 card software needed with Movie shop if possible
Post by: VingtTrois on October 16, 2010, 03:55:29 PM
To use this card I think you just need to have MOVIESHOP v3.6
Title: Re: VLab Motion 1.1 card software needed with Movie shop if possible
Post by: AmigaEd on October 16, 2010, 04:10:50 PM
PM sent...
Title: Re: VLab Motion 1.1 card software needed with Movie shop if possible
Post by: Castellen on October 16, 2010, 05:57:46 PM
ADFs of MovieShop 4.3 (latest) on my webserver here:
http://amiga.serveftp.net/temp/MovieShop_4-3.lha

Yes it's copyrighted, but the software is of no use without the hardware, so you've already got the 'dongle'.

Cheers,
Anthony.
Title: Re: VLab Motion 1.1 card software needed with Movie shop if possible
Post by: orb85750 on October 16, 2010, 07:55:07 PM
Quote from: Castellen;585097
ADFs of MovieShop 4.3 (latest) on my webserver here:
http://amiga.serveftp.net/temp/MovieShop_4-3.lha

Yes it's copyrighted, but the software is of no use without the hardware, so you've already got the 'dongle'.

Cheers,
Anthony.


Movieshop 5 is not usable on a real Amiga?
Title: Re: VLab Motion 1.1 card software needed with Movie shop if possible
Post by: Castellen on October 16, 2010, 09:15:03 PM
Quote from: orb85750;585113
Movieshop 5 is not usable on a real Amiga?


As I recall, ver 5 was a release for the Casablanca Amiga clone??  I'm possibly wrong, so do ask Google.  Fairly sure that v4.3 was the last release for the standard Amiga version that used the Zorro2 VLab Motion card.
Title: Re: VLab Motion 1.1 card software needed with Movie shop if possible
Post by: clusteruk on October 16, 2010, 11:26:02 PM
Quote from: Castellen;585097
ADFs of MovieShop 4.3 (latest) on my webserver here:
http://amiga.serveftp.net/temp/MovieShop_4-3.lha

Yes it's copyrighted, but the software is of no use without the hardware, so you've already got the 'dongle'.

Cheers,
Anthony.



Much appreciated.
Title: Re: VLab Motion 1.1 card software needed with Movie shop if possible
Post by: jaesonk on November 24, 2021, 07:27:59 AM
MovieShop 5.x only works with the DraCo Vision Tower or Cube that has the DraCo Motion card installed.  It requires the new ZORAN chips.  Some early DraCos shipped with VLab-Motion & Toccata cards.  These models used MovieShop 4.x

Casablanca followed the DraCo and uses the ZORAN chips as well.  But the edit software is very different from MovieShop.  It is a greatly simplified icon based editing system.  Here's a tutorial video for Casablanca:
https://amigavideo.net/casablanca-user-training-tape/