|
|
| From tape to hard disk - H2O2 Front plate trial | ||
 |
||
| Previous Image | Next Image | ||
|
Description: On rkauer's suggestion to find a whiter front plate for the SCSI enclosure (Original can be seen here), I decided to try treating the front plate with hydrogen peroxide as recently discussed here on Aorg. I used "Weller Welloxon Perfect Creme Developer 12%" as it was the strongest H2O2 containing product that I could borrow for the test. A couple of days later in bright sunshine, and you can see the results for yourself ;-) Picture Stats: Views: 1436 Filesize: 288.92kB Height: 768 Width: 1024 Posted by: Hodgkinson at July 24, 2008, 11:33:02 AM Image Linking Codes
|
||
| 0 Members and 1 Guest are viewing this picture. |
| Hodgkinson Posts:1080 | July 25, 2008, 09:22:35 AM It's worked so well I could really do with doing the whole case with H2O2 :-D Problem is then the front wouldn't match the paintwork :crazy: PS. Note the wires going to the front of the HDD - The HDD activity LED is now a 10mm white LED positioned just below the C= - You can just see the top edge of it in the window. I've also swapped out the old fan from the enclosure as it was making more noise than the "noisy" HDD! (An attempt to disassemble and fix the fan showed that some shaft spacers had disintegrated). |
| rkauer Posts:3263 | July 25, 2008, 09:12:07 AM Wow. Now it looks a lot better! Thanks Rich for the kind words. BTW: that package didn't show 'till now! |