Currently my towered A4000 is my main machine along with my Minimig v1.1 (ARM).
At some point I need to eBay a few spare miggies that are just gathering dust, but I want to assemble them as useful working systems. I know I can get more breaking them up, but I want to hand over some working sytems hopefully to people getting back into the Amiga and who might have forgotten half of what they knew.
Plans are for:
A1200 in Elbox Tower (NTSC).
Keyboard adapter with PC keyboard.
IDE Hard drive fitted with Classic Workbench AGA pagage installed.
(no "u" adapter for PCMCIA)
A2000 ECS Modded to boot into PAL (can change back with jumper)
Buddha IDE card
IDE Hard drive with Classic Workbench package installed
IDE CD ROM
8MB Zorro RAM card (unless sold seperately in which case I'll insert a CBM Zorro SCSI card with 2MB)
"Amber" Scan Doubler/Flicker Fixer in graphics slot
A2000 Keyboard
A3000 68030 model with CBM040/25 CPU card fitted (from my A4000)
IIRC 4MB of ZIP RAM on mobo
2 x FDD
Classic Workbench package installed on either an internal SCSI drive (most likely) or an external ORB 2GB cartridge drive
A3000 keyboard
Odds and ends:
2 x Squirrel PCMCIA SCSI adapters with software
SCSI ORB 2GB drive (unless used in A3000)
Zorro II SCSI card with 2MB RAM (unless used in A2000)
Zorro II 8MB RAM card (unless used in A2000)
Broken A2000 GVP 68030 CPU card (sometimes works, mostly doesn't) with SIMM - hopefully someone can fix it
CD32 PAL unit with UK PSU & Controller
Philips CDi NTSC unit with FMV module, US power supply & controller
4 x Internal ZIP100 IDE drives
1 x External ZIP100 SCSI drive
any other stuff I find covered in cobwebs
oh, and a Cybervision 643D unless I install it in the A2000 or A3000...
I'll let you all know when I do it.