I've fitted a Gotek floppy emulator drive plugged into the df0: socket on my A1200 (in 2015), but it now seems unable to read the 8Gb USB stick I copied lots of ADF files onto, probably in 2015 and 2016, although I can read these files when I plug it into my laptop. I've also tried copying some ADF files onto a 16Gb USB stick I bought last year, but it doesn't work with that at all. Some indications are that when the old USB stick is inserted it shows a number on the three digit display, but when the newer USB stick is inserted, it just shows a series of dashes, the same as when there's no USB stick inserted at all. I suppose it may just be that the Amiga firmware on the Gotek drive doesn't support 16Gb sticks and has been deleted or corrupted. If that's the case, then how can I reflash it? What can I connect it to in order to achieve this? I hope to sort this out as quickly and as cheaply as possible. To cap it all, I've also managed to break my PCMCIA 2Mb RAM card, so I can't do all that much with my A1200 at the moment! Any advice would be greatly appreciated.