Yes but I am very satisfied with the speeds I am getting (circa 30mb/s)
I want to be positive that I am using the correct maxtransfer file system setting for my setup.
Yes as far as I am aware. Best person to answer this is Thomas. The guy is a guru when it comes to this stuff.
I know with CF and SD card 0x01fe00 is favoured on IDE back in the day. But these days on OS 3.2 HDToolbox it’s default for maxTransfer is what you are using now.
If you do start to get data corruption. Then check PFs3 version isn’t 18.5 as it’s known for corrupting data on small file transfers.
And if that doesn’t work, then try 0x01fe00, but this will slow down transfers.
Toni Willen has a link to a BETA version 20.0. Which I have been using without any major issues. This allows for 4096K block transfers, which the current 19.2 doesn’t do, even if set in HDToolbox.