Netsurf OS 3.1.4 not working

[goldfish]

Hi

Any way to get Netsurf to work with OS 3.1.4 as it doesnt contain reaction Like os3.9 and 3.5

[utri007]

Here

http://eab.abime.net/showpost.php?p=1367400&postcount=5

[goldfish]

Thanks I will give it a go.

[goldfish]

Well nearly but not quite tries to load then fails with suspended message. Reboot required🤔☹️

[kolla]

What do you mean “suspended message”?

[utri007]

Well nearly but not quite tries to load then fails with suspended message. Reboot required🤔☹️

What kind of Amiga you have? At bare minium, you would need 24mb ram. You would have no use (ever) for it, if you have a anything less than 68040 CPU.

Do you have these installed

http://aminet.net/package/dev/misc/renderlib31
http://aminet.net/package/dev/misc/guigfxlib

[chris]

Well nearly but not quite tries to load then fails with suspended message. Reboot required🤔☹️

I get that with my emulated environment, I think it's a bug in NetSurf I've never managed to track down, but could be that AmiSSL 4.3 doesn't work without an FPU apparently.
Try the newer builds which should be using AmiSSL 4.4: https://ci.netsurf-browser.org/builds/amigaos3/

[goldfish]

IM running aca1233 128mb most likely be slow but would be nice to have it load at least. I will see if I can find newer version.

[utri007]

You need to found no fpu versions of render and guigfx libraries.

[kolla]

@goldfish
If you had written that you get software failure 8000 000B, it would have been more obvious, and all this guessing around could have been avoided.