A1200 L.E.D Connector, what does what?

[Ryu]

Just wondering what pin does what on the A1200 LED connector. Im quite sure the first is the power line... but what do the other 3 past the blank one for, in what order are the HDD, FDD and power LED? Im asking because im doing a tower conversion...

Thanks to all in advance.

[Linchpin]

hmm daz i just done this,, there is an eazy way to find out.

one is common ground IIRC... but i dont think its the black one.

if you look on the little board you can planley see what lead does what. If not, ill let you know when i get home from work

kev

[Ryu]

like i said linchy, im sure the one on its own before the blank one is the common ground..

[Linchpin]

hmm, oh well if you get no answers i can take a look at mine later.

I think i just followed the path tho..

[Brian]

There should be 4 pins, 3 being together then a empty space and then the last pin. The single pin is common ground for all leds, the first 3 pins are signal. The middle signal pin is floppy but I can't remember if HDD is the first or if power is. For the A1200T project I'm working on I made a little print board with a cable going to the motherboard and pins for the cables from the tower to go on.

[Ryu]

thanks brian, now i just need to know which way round the outer 2 pins are :-)

Here its an eyetech easy tower... i removed the led connectors when i removed the motherboard the otherday, but in my haste i didnt write down in what order they came off in. I dont spose anyone would know what colour is the ground on the led connectors in an eyetech easy tower would they?

[Ryu]

can anyone else help at all? really want to get her all back together again before the nights out...

[Ryu]

doesnt matter ive worked it out myself
first is HDD, 2nd is FDD 3rd is power, with the one on its own the common ground.

and the white wire is the ground on the LED connectors in the easy tower.