|
|
|
| Battery replacement (3/3) |
 |
| Previous Image | Next Image |
|
Description: This shows the CR-2032 battery holder soldered to the Amiga 2000 motherboard (v6.2) by only one of its two pins. The two-pin spacing of the holder does not match the pin spacing of the removed NiCD rechargeable battery. The non-soldered side of the holder could be secured to the board using something like superglue, if desired. It is possible that a holder for a smaller battery would work, such as a CR-2016, but I have not investigate this. As well, a holder with only two pins rather than three, which is the standard CR-2032 holder from Radio Shack, would work.
Picture Stats: Views: 932 Filesize: 463.5kB Height: 768 Width: 1024 Posted by: LoadWB at October 31, 2010, 08:02:32 PM |
| 0 Members and 1 Guest are viewing this picture. |