Welcome, Guest. Please login or register.

Author Topic: Alien Breed 3D  (Read 5799 times)

Description:

0 Members and 1 Guest are viewing this topic.

Online AndyFC

Re: Alien Breed 3D
« on: July 16, 2004, 10:22:07 AM »
I got AB3D for my unexpanded CD32 for the Christamas it came out and played it loads, but got stuck on level 4. I have played it on WinUAE and on my A1200 ('050 processor, 32 MB Fast RAM) but don't seem to remember any improvement over playing it on the CD32.

There was something in the manual about pressing a joypad button if you had FastRAM installed and it would improve performance, but I never found this option, so assumed it got left out of final game.

I got AB3DII when I bought my Blizzard '030 from Gordon Harwoods. I enjoyed playing it but couldn't get past the second level.

I have managed to install and run AB3DII on WINUAE/AIAB using the retarg patch off Aminet. It seems quite stable.
A1200 in DIY Tower. 3.2 ROMs (softkicking 3.2.2), OS 3.2.2 with ClassicWB, CF card, CD RW and IDE to SD adapter running off the internal IDE port (using the A4000 4-port IDE adapter from Amigakit), Pistorm 32 lite with Pi4/2GB/Emu68 or Blizzard 1230-IV, with 32MB 60ns RAM and 50MHz 68882 FPU. 3COM PCMCIA Network card running with Miami DX.
MorphOS on PowerMac G5 and ATI 9600 pro
 

Online AndyFC

Re: Alien Breed 3D
« Reply #1 on: July 16, 2004, 10:23:17 AM »
Is there an RTG patch for AB3d 1?
A1200 in DIY Tower. 3.2 ROMs (softkicking 3.2.2), OS 3.2.2 with ClassicWB, CF card, CD RW and IDE to SD adapter running off the internal IDE port (using the A4000 4-port IDE adapter from Amigakit), Pistorm 32 lite with Pi4/2GB/Emu68 or Blizzard 1230-IV, with 32MB 60ns RAM and 50MHz 68882 FPU. 3COM PCMCIA Network card running with Miami DX.
MorphOS on PowerMac G5 and ATI 9600 pro