I'm back with an A600

[Doppie1200]

Ok, I'm not new. But I feel like it. After being absent for some years I decided to get me an A600.

I used to have an A1200 with 68060 scandoubler ....the works! But in a moment of weakness, many moons ago, I sold it. Having regretted that ever since, time came to get back into Amiga.

This time I stumbled upon this A600 that came with an ACA620 and 2MB chip ram. Not too shabby.


It is a rev 1.1 board in there. A kickstart 3.1 has already been fitted by the previous owner.


So, the plan is to get an indivision ECS in there. Nobody uses RF these days so that thing can go. Cut a VGA bracket in shape to fit in there.


Sadly, the required A604n is not in stock so the indivision has to wait.
The ACA620 was not bolted down and had no cooler. I read they had a tendency to run hot so I fitted a nice cooler. Together with a 4G compact flash she should be able to take some software.



Going for lean and mean this time with a 'BetterWB' setup. Pretty snappy! Hooked up a composite to VGA converter for the time being. Surprisingly readable results with the composite output.
Here she is:

[Doppie1200]

Hi, thanks. The box that came with the aca reads rev 2. The system has yet to crash and I have played many hours of maniac mansion. There was no mounting stuff included with mine as well. But I like robustness so I bolted down the lot. I was surprised to learn the motherboard is only bolted down in two places. It's a low end Amiga after all.