Amiga.org

Amiga computer related discussion => Amiga Hardware Issues and discussion => Topic started by: Ancalimon on March 17, 2024, 11:18:35 AM

Title: XSURF 100 - Poor Performance?
Post by: Ancalimon on March 17, 2024, 11:18:35 AM

Using the 060-66 and OS3.2+Easynet Pro or OS3.9+Genesis, I get less than 50kb/sec. Using 604e 400 and Os4.1FE, I get around 200kb/s~250kb/s downloading from Turran FTP.

Is there any trick to increase speed?

Title: Re: XSURF 100 - Poor Performance?
Post by: Boing-ball on March 17, 2024, 05:24:39 PM

You do have the jumper set correctly on the X-Surf? I.e not set to Z2?

Title: Re: XSURF 100 - Poor Performance?
Post by: Ancalimon on March 17, 2024, 05:38:00 PM

Just took a jumper off from the card. Will try again

Title: Re: XSURF 100 - Poor Performance?
Post by: Boing-ball on March 17, 2024, 06:57:09 PM

If you have taken the jumper off. Then it’s set to Z3 (Zorro 3) which is the correct speed setting for the A3000 and A4000.

I use a X-Surf100 with the RoadShow TCP/IP stack. Runs fast!