Welcome, Guest. Please login or register.
Amiga Kit Amiga Store Hollywood MAL AMIStore App Store A600 Memory

AuthorTopic: opinion: Best AROS configuration  (Read 1354 times)

0 Members and 1 Guest are viewing this topic.

Offline Motormouth

opinion: Best AROS configuration
« on: April 30, 2012, 12:24:40 AM »
I just wanted to get the community's opinion on the best AROS config.

I put ICAROS 1.4.1 on a 11.6" screen E450 powered notebook, I used a 16 gig SD card for the AROS harddrive (which by the way worked well with a fat partition, a sys: partition, and work: partition)

Anyway the VESA screen modes are non-ideal for the 1366x768 screen and I am guessing that wireless internet drivers do not exist.

I have a significant amount of PC hardware lying around and thought about building a AROS Specific Box.  I have a Nvidia 6600GT and SB Live 5.1 card (both which from the AROS page look to be well supported).  

What are the best hardware pieces and what should one avoid?
Are there specific conflicts between different hardware?
« Last Edit: April 30, 2012, 04:46:16 AM by Motormouth »

Offline amiman99

Re: opinion: Best AROS configuration
« Reply #1 on: April 30, 2012, 03:51:26 AM »
I'm not an expert, but I can tell you what works for me.
I  have PNY FX5200, SB 5.1 Live and 3COM network card.
I'm also using an older EIDE HD, because newer types don't work as a boot drive.

Icaros 1.4 was not working out for me, was freezing at random times, and previously the v1.3 worked fine, so I'm not sure what changed.
I then changed to v0.8 AROS Broadway and it seems more stable.
A500 KS 2.1, 1MB Chip, 68000
A600 KS 3.1, 2MB Chip, ACA630 32MB RAM
A1000 KS 1.3, 8MB RAM
A1200 KS 3.1, Blizzard IV 50MHz 64MB RAM
A2000 KS 2.1, 68030 25MHz, 6MB RAM
A3000 KS 3.1, 68030 25MHz, 16MB RAM
A4000 KS 3.0, 68040 25MHz, 16MB RAM
(AROS BOX) Dead :(

Offline OlafS3

Re: opinion: Best AROS configuration
« Reply #2 on: April 30, 2012, 09:36:00 AM »
I would recommend you to ask this on aros-exec because there are the most Aros experts

Offline fishy_fiz

Re: opinion: Best AROS configuration
« Reply #3 on: April 30, 2012, 10:28:05 AM »
The GT6600 should work quite nicely as should the sb live. As for mobo+cpu combinations for older stuff something like an athlonxp + nf2 based mobo should be a decent choice (damocles some time ago made and sold such systems, so support there can be pretty decent. For more recent stuff I personally swear by intel socket775 based mobos. In particular anything with an p45 based core logic and ich7/8/9/10 i/o controllers. Throw in a cheap core2duo/quad and in amiga terms youve got yourself a nice powerful little setup. Ive also had decent luck with g31/33/41 based mobos as far as socket775 in concerned. Recent(ish) AMD wise you cant go too far wrong with an ARESOne system (although I suspect youre more interested in building from parts?). One thing worth mentioning though is that there's a bigger difference between an athlon2 and a phenom2 as there is on more mainstream Oses, due to the lack of shared cache (on multicore systems with a shared cache architecture you'll end up one active core with a very large cache).

Feel free to ask anymore questions if you have them. Ive fooled around with aros on a lot of hardware over the last decade or so, so have picked up a pretty decent idea of what works, and to what degree.

Unfortunately it can be a bit of a lucky dip sometimes, even when armed with as much info as you can get ahold of. There's enough subtle differences with hardware that sometimes even mirroring someone elses fully functioning system can result in a system with quirks. Having said that though its not nearly as bad as some people will suggest.
Near as I can tell this is where I write something under the guise of being innocuous, but really its a pot shot at another persons/peoples choice of Amiga based systems. Unfortunately only I cant see how transparent and petty it makes me look.