Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: XSURF 100 - Poor Performance?  (Read 310 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline AncalimonTopic starter

  • Hero Member
  • *****
  • Join Date: Apr 2002
  • Posts: 522
  • Country: 00
    • Show only replies by Ancalimon
    • http://www.myspace.com/orhunmusic
XSURF 100 - Poor Performance?
« on: March 17, 2024, 11:18:35 AM »
Using the 060-66 and OS3.2+Easynet Pro or OS3.9+Genesis, I get less than 50kb/sec. Using 604e 400 and Os4.1FE, I get around 200kb/s~250kb/s downloading from Turran FTP.

Is there any trick to increase speed?
Logged
A4000T, 604e@400&060@66, 128MB+16MB+Zorram256, CVisionPPC, VLabMotion, Toccata, XSurf100&RapidRoad, Prisma Megamix

A1200, Blizzard060@50, 256MB, Blizzard IV SCSI, FastATA mk4
 

Offline Boing-ball

Re: XSURF 100 - Poor Performance?
« Reply #1 on: March 17, 2024, 05:24:39 PM »
You do have the jumper set correctly on the X-Surf? I.e not set to Z2?
Logged
 
The following users thanked this post: Ancalimon

Offline AncalimonTopic starter

  • Hero Member
  • *****
  • Join Date: Apr 2002
  • Posts: 522
  • Country: 00
    • Show only replies by Ancalimon
    • http://www.myspace.com/orhunmusic
Re: XSURF 100 - Poor Performance?
« Reply #2 on: March 17, 2024, 05:38:00 PM »
Just took a jumper off from the card. Will try again
Logged
A4000T, 604e@400&060@66, 128MB+16MB+Zorram256, CVisionPPC, VLabMotion, Toccata, XSurf100&RapidRoad, Prisma Megamix

A1200, Blizzard060@50, 256MB, Blizzard IV SCSI, FastATA mk4
 

Offline Boing-ball

Re: XSURF 100 - Poor Performance?
« Reply #3 on: March 17, 2024, 06:57:09 PM »
If you have taken the jumper off. Then it’s set to Z3 (Zorro 3) which is the correct speed setting for the A3000 and A4000.

I use a X-Surf100 with the RoadShow TCP/IP stack. Runs fast!
Logged
 
Pages: [1]   Go Up
« previous next »