Welcome, Guest. Please login or register.
Amiga Kit Amiga Store Iridium Banner AMIStore App Store A1200/A600 4xIDE Interface


A4000D Capacitor replacement
A4000D Capacitor replacement
Previous Image | Next Image
Description: Audio area of the A4000. I replaced all the original capacitors with RS sourced Panasonic electrolytic types. At the same time I took the opportunity to change the audio capacitors to 'bi-poler' types. The PCB was actually quite bad, with the horrid green/dull joints where the electrolyte had leaked out of them.

Picture Stats:
Views: 1242
Filesize: 161.99kB
Height: 768 Width: 1024
Posted by: AmigaFun at September 13, 2008, 09:10:04 PM

0 Members and 1 Guest are viewing this picture.

Comments (5)

September 16, 2008, 05:01:01 AM
You didn't used non-polarized units for the sound output, tsc, tsc...
September 15, 2008, 10:24:40 PM
I have no experience in soldering SMD's and when I practiced soldering the normal capacitors on an A1200 motherboard in place of SMD's, the result was quite good and was more than happy with.
In hindsight some of the leads on the capacitors could have been cut shorter.
Good news is that it all works well and the sound is rather good !
September 14, 2008, 12:50:07 PM
no need of hot air soldering tools for those SMD capacitors.

Some Flux and a small tip (themperature regulation needed at least)

Anyway its ok even like you did.
September 14, 2008, 12:24:25 PM
I don't have the proper soldering equipment for SMD's. I do have my eye on a hot air reworking tool though, so maybe...
Currently testing the A4000 now and so far all OK And thats including the sound, which I know has been a point of discussion on these forums before!
September 14, 2008, 11:14:52 AM
sorry but i have to ask ... why not SMD capacitors?

RS is a good source of reliable SMD 105 degrees alluminium capacitors.

Powered by: SMF Gallery