Welcome, Guest. Please login or register.
Amiga Kit Amiga Store Iridium Banner AMIStore App Store A1200/A600 4xIDE Interface

 



Inside the A500 PSU connector
Inside the A500 PSU connector
Previous Image | Next Image
Description: Bugger, it's moulded...
I was hoping to add a +5v sense wire from the power connector back to the ATX PSU (For an A1200) that I’m wiring up, but unfortunately this doesn't seem to be easily possible.
Picture Stats:
Views: 1220
Filesize: 210.98kB
Height: 768 Width: 1024
Posted by: Hodgkinson at December 27, 2007, 03:26:45 PM

0 Members and 1 Guest are viewing this picture.

Comments (2)

Hodgkinson
Posts:1080
December 29, 2007, 12:34:38 PM
That's how it’s wired at the moment, but the purpose of the +5v sense wire is to adjust the voltage output of the PSU to help counteract the voltage drop across the supply leads (In the same way as it was wired originally – To one of the motherboard +5v power pins in the connecter).
With it wired back to +5v inside the PSU, the benefit of having a +5v sense wire available is nullified.

Hodgkinson.
rkauer
Posts:3263
December 29, 2007, 03:50:12 AM
Put the sensor inside the PSU!


Powered by: SMF Gallery