Welcome, Guest. Please login or register.
Amiga Kit Amiga Store Hollywood MAL AMIStore App Store A600 Memory

 



Replacing Amiga 4000 capacitors 3
Replacing Amiga 4000 capacitors 3
Previous Image | Next Image
Description: Replaced the Amiga 4000 capacitors by normal ones of a good brand. Also replaced the battery by a NiMH one.
Picture Stats:
Views: 1356
Filesize: 283.84kB
Height: 768 Width: 1024
Posted by: PulsatingQuasar at January 05, 2009, 01:03:54 PM

0 Members and 1 Guest are viewing this picture.

Comments (4)

amiga1084
Posts:214
January 11, 2009, 04:34:51 AM
Hello,
I noticed you have Buster 9 SMT. Any plans to remove that to install Buster 11?

Thanks
PulsatingQuasar
Posts:340
January 06, 2009, 09:12:21 PM
@AmigaGTI

No it isn't.

First of all SMD caps are more work to get back on there and especially removing them again.

And for the height it doesn't really matter because if you haven't noticed there are 2 normal capacitors already there on the Amiga 4000 with a rating of 470 uF.

I have a Picasso 4 in the lower slot and the SIMM's actually are higher then my normal capacitor soldering.
The capacitors have the same height as the battery.

Your are more likely to ram the Picasso 4 into the SIMMs then the capacitors.

So no, SMD capacitors are not better.
AmigaGTI
Posts:33
January 06, 2009, 02:49:29 PM
Why this? Put SMD caps on it! It seems very better as this!
rkauer
Posts:3263
January 05, 2009, 09:42:34 PM
Well done!


Powered by: SMF Gallery