Welcome, Guest. Please login or register.
Amiga Kit Amiga Store Iridium Banner AMIStore App Store A1200/A600 4xIDE Interface


A4000D MiniATX PSU replacement (1/2)
A4000D MiniATX PSU replacement (1/2)
Previous Image | Next Image
Description: This is the Startech MiniATX PSU I use in my 4000D along with an ATX adapter.  Works very well, gives much needed air-flow, and provides a little extra room for long SCSI CD-ROMs.

Also viewable in the picture: X-Surf 3cc, IBM 18GB UW-SCSI drive (upside-down to accommodate cabling,) CyberStorm MKIII with 486 fan, and Plextor 12x CD-ROM.
Picture Stats:
Views: 1503
Filesize: 289.84kB
Height: 768 Width: 1024
Posted by: LoadWB at September 13, 2008, 07:13:27 PM

0 Members and 1 Guest are viewing this picture.

Comments (2)

February 23, 2009, 06:16:33 AM
It's true.  Without the power supply you're missing a screw hole for one of only two screws for the cover.  None the less, mine still seems fairly rigid, and since I don't move it around, it's fine as it is.
September 14, 2008, 03:41:16 PM
Been thinking of doing the same to my A4000. But no matter how you look at it the stock A4000 PSU is actually quite reliable and a structural part of the case.

I am going to cut my PSU open in the back and glue a mesh on, I have already replaced the fan with a hi-end quiet fan and it made quite an improvement.

Powered by: SMF Gallery