Welcome, Guest. Please login or register.
Forums
« previous next »
Pages: [1]   Go Down

Author Topic: Opening an Amiga 500 - which Torx?  (Read 4673 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline EverblueTopic starter

  • Hero Member
  • *****
  • Join Date: Dec 2004
  • Posts: 584
    • Show all replies
Opening an Amiga 500 - which Torx?
« on: January 06, 2009, 07:04:14 PM »
Tomorrow I will be getting an amiga 500 for free which needs floppy drive replacement. I have been told that it has torx screws so its a good idea to buy an approppriate screwdriver.

Anyone knows which bit size I will need?

Cheers


E'Blue
Logged
 

Offline EverblueTopic starter

  • Hero Member
  • *****
  • Join Date: Dec 2004
  • Posts: 584
    • Show all replies
Re: Opening an Amiga 500 - which Torx?
« Reply #1 on: January 06, 2009, 07:37:36 PM »
Thats not torx.
Logged
 

Offline EverblueTopic starter

  • Hero Member
  • *****
  • Join Date: Dec 2004
  • Posts: 584
    • Show all replies
Re: Opening an Amiga 500 - which Torx?
« Reply #2 on: January 06, 2009, 09:06:38 PM »
Logged
 

Offline EverblueTopic starter

  • Hero Member
  • *****
  • Join Date: Dec 2004
  • Posts: 584
    • Show all replies
Re: Opening an Amiga 500 - which Torx?
« Reply #3 on: January 07, 2009, 03:06:25 PM »
Ok I got 2 x A500s today.

On one of them, ALL SCREWS were torx.

On the other, screws on the outside were normal, inside, torx.

I used torx #10 to unscrew.
Logged
 
Pages: [1]   Go Up
« previous next »