Amiga.org
Amiga computer related discussion => Recommended Amiga Dealers => Topic started by: mbueler on January 10, 2014, 11:31:16 PM
-
Hi I`m in Sydney and looking for somewhere to get a A4000D and A600 motherboard capacitors replaced (I believe that's the issue but not 100% sure).
Anyone know of someone trust worthy to do this?
-
Not sure about Sydney, but there's a very good bloke in Melbourne:
http://www.amisynth.on.net/
Fixed my A4000, which had badly leaking caps...
Cheers,
Mike.
-
does he know anything about fixing ppc accelerators? ..or 040s
-
Not sure about Sydney, but there's a very good bloke in Melbourne:
http://www.amisynth.on.net/
Fixed my A4000, which had badly leaking caps...
Cheers,
Mike.
Thanks Mike,I'll call him on Monday.
-
Another possible option is that I offer component level repair on Amiga main boards. Typical turnaround time is 5 days at present. Freight costs between Australia and New Zealand are quite reasonable.
Feel free to contact me for a price estimate.
http://amiga.serveftp.net
-
I recapped my A600 the other day, I would have offered to do yours (as a starting point, then maybe do the A4000 in future)
However, I bought enough capacitors to recap two A600's, then used half of them recapping a Sega Game Gear. :p
I had been doing electronics assembly for nearly 9 years, till someone decided to make me redundant.
So, now I've set up a little work area at home for repairing/modifying/building bits and pieces.
(http://imagizer.imageshack.us/v2/800x600q90/163/7pfb.jpg)
(http://imagizer.imageshack.us/v2/800x600q90/560/5bot.jpg)
-
I recapped my A600 the other day, I would have offered to do yours (as a starting point, then maybe do the A4000 in future)
However, I bought enough capacitors to recap two A600's, then used half of them recapping a Sega Game Gear. :p
I had been doing electronics assembly for nearly 9 years, till someone decided to make me redundant.
So, now I've set up a little work area at home for repairing/modifying/building bits and pieces.
(http://imagizer.imageshack.us/v2/800x600q90/163/7pfb.jpg)
(http://imagizer.imageshack.us/v2/800x600q90/560/5bot.jpg)
Nice setup you have there :)
-
Another possible option is that I offer component level repair on Amiga main boards. Typical turnaround time is 5 days at present. Freight costs between Australia and New Zealand are quite reasonable.
Feel free to contact me for a price estimate.
http://amiga.serveftp.net
^ Replaced my 1200 caps... look as good as new, as well as some other fault finding. Top bloke.
-
Any current lists of people who can repair / recap A1200s in Australia? Mine has stopped outputting video signal (the function lights start up normally) and if it needs a recap, keen to do that too.
-
Not sure if Amisynth (Melbourne) is still active, haven't seen anything from Paul in a while and the website no longer exists.
I'm still doing worldwide Amiga repairs/support in New Zealand, feel free to contact me for a price estimate.
http://amiga.serveftp.net