Welcome, Guest. Please login or register.

Author Topic: My Quicksilver 2002 doesnt like MorphOS  (Read 8611 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline Kronos

  • Resident blue troll
  • Hero Member
  • *****
  • Join Date: Feb 2002
  • Posts: 4017
    • Show only replies by Kronos
    • http://www.SteamDraw.de
Re: My Quicksilver 2002 doesnt like MorphOS
« Reply #29 from previous page: August 18, 2011, 10:11:38 PM »
Odd, normally these modes just follow a simple norm.....

You might to try a monitor thats one size bigger (the usual 21" that will go to 1680x1050) and use the 1440x900 mode defined there.

Those things can be tricky .... just reminds me when I tried to get a 24" 16:10 running under 1.4.x (which only had 4:3 monitors predifined).

If your monitor has an analoge input (VGA or via DVI-VGA adapter) you might try it there 1st as most monitors are bit less picky on that side.
1. Make an announcment.
2. Wait a while.
3. Check if it can actually be done.
4. Wait for someone else to do it.
5. Start working on it while giving out hillarious progress-reports.
6. Deny that you have ever announced it
7. Blame someone else
 

Offline GulliverTopic starter

Re: My Quicksilver 2002 doesnt like MorphOS
« Reply #30 on: August 18, 2011, 10:16:05 PM »
They were both always connected to their VGA input, directly from Radeon 7500 VGA output on the QS. From VGA to VGA with no adapters in between. :(
 

Offline GulliverTopic starter

Re: My Quicksilver 2002 doesnt like MorphOS
« Reply #31 on: August 19, 2011, 08:23:51 PM »
Bumpety boo