Welcome, Guest. Please login or register.

Author Topic: X5000 Failing to Boot OS4!  (Read 3918 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline AcillTopic starter

X5000 Failing to Boot OS4!
« on: December 26, 2020, 05:05:07 PM »
I've had my X5000 working great for quite a while now. After being turned off for several weeks it no longer boots anything. It will power up and show the initial X5000 screen, the boing ball will spin and it will then turn to a gray screen and sit. If I do nothing it will reset itself and repeat back to the X5000 logo. I can interrupt the boing ball and get into u-boot and interact just fine. If I load OS4 from u-boot menu It shows "Loading finished ######################### 100%" message comes up after a short time. The next Line reads: "About to call loader entry at 0x7BD02020" at which point it just hangs there.

NO media will boot into OS4. The original CD, my recovery USB stick, or the SSD in it with OD4 installed. The last time I used my system it was fine. I didn't make any changes to it. It's sat and now doesn't work.

The odd thing, if I put in the other GPU I have that supports MorphOS and connect the 2nd SSD I have with a clean install of MorphOS on it, it boots fine into that. SO... This is something OS4 related it seems that came up from nowhere. I now have my system back to stock and am still trying to get it to boot into OS4.
Proud Retired Navy Chief!

A4000T - CSPPC - Mediator
Powerbook G4 15", 17"
Powermac G5 2GHZ
AmigaOne X5000
Need Amiga recap or other services in the US? Visit my website at http://www.acill.com and take a look or on facebook at http://facebook.com/acillclassics
 

Offline giZmo350

  • Lifetime Member
  • Hero Member
  • *****
  • Join Date: Apr 2005
  • Posts: 2055
  • Country: 00
  • Thanked: 29 times
  • Gulfport, Miss
    • Show only replies by giZmo350
Re: X5000 Failing to Boot OS4!
« Reply #1 on: December 26, 2020, 05:38:45 PM »
Happy Holidays Paul! From your troubleshooting so far it sounds like the GPU or your primary SSD / primary SSD connection. With your OS4 GPU in place, are you disconnecting the primary SSD when you try to boot OS4 from CD or USB? Just a thought...   ;)  Also, do you have anything plugged into the special “Xorro” slot?

A500: 2MB Chip, 8MB Fast, IndiECS, MiniMegi, IDE4ZorroII on Z-500, KS1.3/KS3.1, WB3.1&BWB
 
A2000HD: 2MB Chip, 128MB Fast, P5:Blizz 2060@50MHz, PCD-50B/4GBCF, XSurf100, RapidRoad, IndiECS, Matze RTG, MiniMegi, CD-RW, SunRize AD516, WB3.9
 
A1200: 2MB Chip, 64MB Fast, 4GBCF, GVP Typhoon 030 @40MHz w/FPU, Subway USB, EasyNet Ethernet, Indi AGA MKI, FastATA MK-IV, Internal Slim CD/DVD-RW, WB3.5

Surfing The Web With AMIGA Is Fun Again!
 

Offline AcillTopic starter

Re: X5000 Failing to Boot OS4!
« Reply #2 on: December 26, 2020, 05:48:46 PM »
System is as basic as it can be, still failing to boot from anything with OS4 on it.
Proud Retired Navy Chief!

A4000T - CSPPC - Mediator
Powerbook G4 15", 17"
Powermac G5 2GHZ
AmigaOne X5000
Need Amiga recap or other services in the US? Visit my website at http://www.acill.com and take a look or on facebook at http://facebook.com/acillclassics
 

Offline AcillTopic starter

Re: X5000 Failing to Boot OS4!
« Reply #3 on: December 26, 2020, 06:04:47 PM »
This is the serial output

2 USB Device(s) found
SATA0 (3 Gbps)
U-Boot 2014.04 (Oct 17 2016 - 08:22:22)
CE at device
CPU0:  P5020, Version: 2.0, (0x82200020)
Core:  e5500, Version: 1.2, (0x80240012)
Clock Configuration:
       CPU0:1995 MHz, CPU1:1995 MHz,
       CCB:798  MHz,
       DDR:665  MHz (1330 MT/s data rate) (Asynchronous), LBC:49.875 MHz
       FMAN1: 498.750 MHz
       QMAN:  399 MHz
       PME:   399 MHz
L1:    D-cache 32 KiB enabled
       I-cache 32 KiB enabled
Reset Configuration Word (RCW):-ST Prod.: DVDRAM GH24NSC0 Rev: LI00
       00000000: 0c540000 00000000 1e1e0000 00000000
       00000010: 44808c00 ff002000 68000000 45000000
       00000020: 00000000 00000000 00000000 0003000f
       00000030: a0000000 00000000 00000000 00000000
Board: CYRUS
36-bit Addressing
I2C:   ready
SPI:   ready
DRAM:  Initializing....using SPD
DDR: failed to read SPD from address 81
Detected UDIMM VS2GB1333D3
There is no rank on CS0 for controller 0.
Not enough bank(chip-select) for CS0+CS1 on controller 0, interleaving disabled!
Not enough bank(chip-select) for CS0+CS1 on controller 1, interleaving disabled!
Not all DIMMs are identical. Memory controller interleaving disabled.
2 GiB (DDR3, 64-bit, CL=9, ECC off)

Local Bus Controller Registers
BR0     0xE0001001      OR0     0xFFF00010
BR1     0xE1001001      OR1     0xFFF00010
BR2     0x00000000      OR2     0x00000000
BR3     0x00000000      OR3     0x00000000
BR4     0x00000000      OR4     0x00000000
BR5     0x00000000      OR5     0x00000000
BR6     0x00000000      OR6     0x00000000
BR7     0x00000000      OR7     0x00000000
LBCR    0x40000000      LCRR    0x80010004
L2:    512 KiB enabled
Corenet Platform Cache: 2 MiB enabled
SERDES: bank 2 disabled
MMC:  FSL_SDHC: 0
EEPROM: NXID v0
PCIe1: Root Complex, x4 gen2, regs @ 0xfe200000
  01:00.0     - 1002:683d - Display controller
  01:00.1     - 1002:aab0 - Multimedia device
PCIe1: Bus 00 - 01
PCIe2: Root Complex, x4 gen2, regs @ 0xfe201000
  03:00.0     - 111d:8092 - Bridge device
   04:01.0    - 111d:8092 - Bridge device
    05:00.0   - 12d8:e111 - Bridge device
   04:02.0    - 111d:8092 - Bridge device
    07:00.0   - 10ec:8168 - Network controller
   04:03.0    - 111d:8092 - Bridge device
   04:08.0    - 111d:8092 - Bridge device
   04:10.0    - 111d:8092 - Bridge device
PCIe2: Bus 02 - 0a
PCIe3: disabled
PCIe4: disabled
Looking for VGA
PINS: 0xfc000808
videoboot: Booting PCI video card bus 1, function 0, device 0
Begin BIOS POST
End BIOS POST
Setting VESA Mode
Found required VESA mode
About to set mode 279
About to get mode
Got mode 49431 (0xc117)
OK
XSize = 1024 YSize = 768 Base =0xe0000000
mmio_base = 0x80000000
bgx = 0xad55ad55 fgx = 0x0
In:    serial
Out:   serial
Err:   serial
ID: NXID v0
SN: 116330024
UID: 4429431001910050e4d4a080a0800000
Errata: ÿÿÿÿÿBGÿ
Build date: 2015/06/11 14:42:47
CRC: 3d2fd346
SCSI:  scanning bus for devices...
Found 0 device(s).
Net:   Initializing Fman

MMC read: dev # 0, block # 1130, count 128 ...
Fman1: Uploading microcode version 106.1.0
Tuning PHY @ 3
Tuning PHY @ 7
FM1@DTSEC4 [PRIME], FM1@DTSEC5

MMC read: dev # 0, block # 1280, count 512 ... 512 blocks read: OK

MMC read: dev # 0, block # 65536, count 131072 ... 131072 blocks read: OK
USB0:   USB EHCI 1.00
scanning bus 0 for devices... 4 USB Device(s) found
USB1:   USB EHCI 1.00
scanning bus 1 for devices... 2 USB Device(s) found
SATA0 (3 Gbps)
       SATA1 (1.5 Gbps)
CE at device
scanning bus for devices...
Not ready...
Not ready...
Not ready...
Not ready...
Not ready...
Not ready...
Not ready...
Not ready...
Not ready...
Not ready...
  Device 0: (1:0) Vendor: HL-DT-ST Prod.: DVDRAM GH24NSC0 Rev: LI00
            Type: Removable CD ROM
            Capacity: not available
Found 1 device(s).
## Starting application at 0x00200000 ...


Loading finished             [########################################] 100 %
About to call loader entry at 0x7BD02020
Proud Retired Navy Chief!

A4000T - CSPPC - Mediator
Powerbook G4 15", 17"
Powermac G5 2GHZ
AmigaOne X5000
Need Amiga recap or other services in the US? Visit my website at http://www.acill.com and take a look or on facebook at http://facebook.com/acillclassics
 

Offline giZmo350

  • Lifetime Member
  • Hero Member
  • *****
  • Join Date: Apr 2005
  • Posts: 2055
  • Country: 00
  • Thanked: 29 times
  • Gulfport, Miss
    • Show only replies by giZmo350
Re: X5000 Failing to Boot OS4!
« Reply #4 on: December 26, 2020, 06:22:53 PM »
Hmmm, must be RAM related. I'm sure you've swapped out RAM? Swapped current RAM modules to check for a RAM failure at a different address?
A500: 2MB Chip, 8MB Fast, IndiECS, MiniMegi, IDE4ZorroII on Z-500, KS1.3/KS3.1, WB3.1&BWB
 
A2000HD: 2MB Chip, 128MB Fast, P5:Blizz 2060@50MHz, PCD-50B/4GBCF, XSurf100, RapidRoad, IndiECS, Matze RTG, MiniMegi, CD-RW, SunRize AD516, WB3.9
 
A1200: 2MB Chip, 64MB Fast, 4GBCF, GVP Typhoon 030 @40MHz w/FPU, Subway USB, EasyNet Ethernet, Indi AGA MKI, FastATA MK-IV, Internal Slim CD/DVD-RW, WB3.5

Surfing The Web With AMIGA Is Fun Again!
 

Offline klx300r

  • Amiga 1000+AmigaOne X1000
  • Hero Member
  • *****
  • Join Date: Sep 2007
  • Posts: 3244
  • Country: ca
  • Thanked: 20 times
  • Gender: Male
    • Show only replies by klx300r
    • http://mancave-ramblings.blogspot.ca/
Re: X5000 Failing to Boot OS4!
« Reply #5 on: December 26, 2020, 06:32:40 PM »
hey Paul I had the same thing happen with my X1000 a year ago and I swapped the CR2032 CMOS battery on the MB and all great....hope this solves your X5000 problem too !


If that doesn't help chekc out the Hyperion support forum (https://forum.hyperion-entertainment.com/)
« Last Edit: December 26, 2020, 06:42:18 PM by F1Lupo »
____________________________________________________________________
c64-dual sids, A1000, A1200-060@50, A4000-CSMKIII
Indivision AGA & Catweasel MK4+= Amazing
! My Master Miggies-Amiga 1000 & AmigaOne X1000 !
--- www.mancave-ramblings.blogspot.ca ---
  -AspireOS.com & Amikit- Amiga for your netbook-
***X1000- I BELIEVE *** :angel:
 

Offline AcillTopic starter

Re: X5000 Failing to Boot OS4!
« Reply #6 on: December 26, 2020, 06:34:26 PM »
Tried a new battery, nothing.

Saw the  DDR sticks showing as not the same, which isn't accurate so I replaced them with another set. The original set was in first, then the newer set. Same issue with loading, but they both reported the same. Tried with just one stick and no change.

U-Boot 2014.04 (Oct 17 2016 - 08:22:22)

CPU0:  P5020, Version: 2.0, (0x82200020)
Core:  e5500, Version: 1.2, (0x80240012)
Clock Configuration:
       CPU0:1995 MHz, CPU1:1995 MHz,
       CCB:798  MHz,
       DDR:665  MHz (1330 MT/s data rate) (Asynchronous), LBC:49.875 MHz
       FMAN1: 498.750 MHz
       QMAN:  399 MHz
       PME:   399 MHz
L1:    D-cache 32 KiB enabled
       I-cache 32 KiB enabled
Reset Configuration Word (RCW):
       00000000: 0c540000 00000000 1e1e0000 00000000
       00000010: 44808c00 ff002000 68000000 45000000
       00000020: 00000000 00000000 00000000 0003000f
       00000030: a0000000 00000000 00000000 00000000
Board: CYRUS
36-bit Addressing
I2C:   ready
SPI:   ready
DRAM:  Initializing....using SPD
DDR: failed to read SPD from address 81
Detected UDIMM KHX1600C10D3/8G
There is no rank on CS0 for controller 0.
Not enough bank(chip-select) for CS0+CS1 on controller 0, interleaving disabled!
Not all DIMMs are identical. Memory controller interleaving disabled.
6 GiB left unmapped
8 GiB (DDR3, 64-bit, CL=9, ECC off)
       DDR Chip-Select Interleaving Mode: CS0+CS1

Local Bus Controller Registers
BR0     0xE0001001      OR0     0xFFF00010
BR1     0xE1001001      OR1     0xFFF00010
BR2     0x00000000      OR2     0x00000000
BR3     0x00000000      OR3     0x00000000
BR4     0x00000000      OR4     0x00000000
BR5     0x00000000      OR5     0x00000000
BR6     0x00000000      OR6     0x00000000
BR7     0x00000000      OR7     0x00000000
LBCR    0x40000000      LCRR    0x80010004
L2:    512 KiB enabled
Corenet Platform Cache: 2 MiB enabled
SERDES: bank 2 disabled
MMC:  FSL_SDHC: 0
EEPROM: NXID v0
PCIe1: Root Complex, x4 gen2, regs @ 0xfe200000
  01:00.0     - 1002:683d - Display controller
  01:00.1     - 1002:aab0 - Multimedia device
PCIe1: Bus 00 - 01
PCIe2: Root Complex, x4 gen2, regs @ 0xfe201000
  03:00.0     - 111d:8092 - Bridge device
   04:01.0    - 111d:8092 - Bridge device
    05:00.0   - 12d8:e111 - Bridge device
   04:02.0    - 111d:8092 - Bridge device
    07:00.0   - 10ec:8168 - Network controller
   04:03.0    - 111d:8092 - Bridge device
   04:08.0    - 111d:8092 - Bridge device
   04:10.0    - 111d:8092 - Bridge device
PCIe2: Bus 02 - 0a
PCIe3: disabled
PCIe4: disabled
Looking for VGA
PINS: 0xfc000808
videoboot: Booting PCI video card bus 1, function 0, device 0
Begin BIOS POST
End BIOS POST
Setting VESA Mode
Found required VESA mode
About to set mode 279
About to get mode
Got mode 49431 (0xc117)
OK
XSize = 1024 YSize = 768 Base =0xe0000000
mmio_base = 0x80000000
bgx = 0xad55ad55 fgx = 0x0
In:    serial
Out:   serial
Err:   serial
ID: NXID v0
SN: 116330024
UID: 4429431001910050e4d4a080a0800000
Errata: ÿÿÿÿÿBGÿ
Build date: 2015/06/11 14:42:47
CRC: 3d2fd346
SCSI:  scanning bus for devices...
Found 0 device(s).
Net:   Initializing Fman

MMC read: dev # 0, block # 1130, count 128 ...
Fman1: Uploading microcode version 106.1.0
Tuning PHY @ 3
Tuning PHY @ 7
FM1@DTSEC4 [PRIME], FM1@DTSEC5

MMC read: dev # 0, block # 1280, count 512 ... 512 blocks read: OK

MMC read: dev # 0, block # 65536, count 131072 ... 131072 blocks read: OK
USB0:   USB EHCI 1.00
scanning bus 0 for devices... 4 USB Device(s) found
USB1:   USB EHCI 1.00
scanning bus 1 for devices... 2 USB Device(s) found
SATA0 (3 Gbps)
       SATA1 (1.5 Gbps)
CE at device
scanning bus for devices...
Not ready...
Not ready...
Not ready...
Not ready...
Not ready...
Not ready...
Not ready...
Not ready...
Not ready...
Not ready...
  Device 0: (1:0) Vendor: HL-DT-ST Prod.: DVDRAM GH24NSC0 Rev: LI00
            Type: Removable CD ROM
            Capacity: not available
Found 1 device(s).
## Starting application at 0x00200000 ...


Loading finished             [########################################] 100 %
About to call loader entry at 0x7BD02020
Proud Retired Navy Chief!

A4000T - CSPPC - Mediator
Powerbook G4 15", 17"
Powermac G5 2GHZ
AmigaOne X5000
Need Amiga recap or other services in the US? Visit my website at http://www.acill.com and take a look or on facebook at http://facebook.com/acillclassics
 

Offline klx300r

  • Amiga 1000+AmigaOne X1000
  • Hero Member
  • *****
  • Join Date: Sep 2007
  • Posts: 3244
  • Country: ca
  • Thanked: 20 times
  • Gender: Male
    • Show only replies by klx300r
    • http://mancave-ramblings.blogspot.ca/
Re: X5000 Failing to Boot OS4!
« Reply #7 on: December 26, 2020, 06:50:25 PM »
ah sorry to hear that...I was gonna say to try only 1 Ram stick but you tried that too...did you try posting this on Hyperion forum as they have a dedicated X5000 section



« Last Edit: December 26, 2020, 06:52:46 PM by F1Lupo »
____________________________________________________________________
c64-dual sids, A1000, A1200-060@50, A4000-CSMKIII
Indivision AGA & Catweasel MK4+= Amazing
! My Master Miggies-Amiga 1000 & AmigaOne X1000 !
--- www.mancave-ramblings.blogspot.ca ---
  -AspireOS.com & Amikit- Amiga for your netbook-
***X1000- I BELIEVE *** :angel:
 

Offline AcillTopic starter

Re: X5000 Failing to Boot OS4!
« Reply #8 on: December 26, 2020, 06:52:45 PM »
I have posted it there and the other forums, lol. Im now at the point of giving up. I honestly hate this thing now.
Proud Retired Navy Chief!

A4000T - CSPPC - Mediator
Powerbook G4 15", 17"
Powermac G5 2GHZ
AmigaOne X5000
Need Amiga recap or other services in the US? Visit my website at http://www.acill.com and take a look or on facebook at http://facebook.com/acillclassics
 

Offline klx300r

  • Amiga 1000+AmigaOne X1000
  • Hero Member
  • *****
  • Join Date: Sep 2007
  • Posts: 3244
  • Country: ca
  • Thanked: 20 times
  • Gender: Male
    • Show only replies by klx300r
    • http://mancave-ramblings.blogspot.ca/
Re: X5000 Failing to Boot OS4!
« Reply #9 on: December 26, 2020, 06:58:34 PM »
I have posted it there and the other forums, lol. Im now at the point of giving up. I honestly hate this thing now.


now you sound like me and my 1200 Tower...talk about love/hate relationships over the years ;D ..stick with it as your X5000 is still being produced today which is a rariity nowadays so at worst even if it is a MB defect you can send it back to A-Eon to get repaired or if still under warranty they'll send you a new one







____________________________________________________________________
c64-dual sids, A1000, A1200-060@50, A4000-CSMKIII
Indivision AGA & Catweasel MK4+= Amazing
! My Master Miggies-Amiga 1000 & AmigaOne X1000 !
--- www.mancave-ramblings.blogspot.ca ---
  -AspireOS.com & Amikit- Amiga for your netbook-
***X1000- I BELIEVE *** :angel:
 

Offline AcillTopic starter

Re: X5000 Failing to Boot OS4!
« Reply #10 on: December 26, 2020, 07:11:17 PM »
I have been messaging Matthew from Amigakit multiple times with no reply back. I am fed up with this machine now and don't want to deal with it any longer.
Proud Retired Navy Chief!

A4000T - CSPPC - Mediator
Powerbook G4 15", 17"
Powermac G5 2GHZ
AmigaOne X5000
Need Amiga recap or other services in the US? Visit my website at http://www.acill.com and take a look or on facebook at http://facebook.com/acillclassics
 

Offline klx300r

  • Amiga 1000+AmigaOne X1000
  • Hero Member
  • *****
  • Join Date: Sep 2007
  • Posts: 3244
  • Country: ca
  • Thanked: 20 times
  • Gender: Male
    • Show only replies by klx300r
    • http://mancave-ramblings.blogspot.ca/
Re: X5000 Failing to Boot OS4!
« Reply #11 on: December 26, 2020, 07:49:46 PM »
I have been messaging Matthew from Amigakit multiple times with no reply back. I am fed up with this machine now and don't want to deal with it any longer.


I hear ya and been there too damn many times with my miggies over the years....December is really difficult time to get hold of anyboby over the pond as (especially Europeans) don't take our point of view on 'vacation" with us a week ...max 2 weeks is most of us working stiffs can get but those guys...man I tell ya more like a month to 6 weeks  :o
____________________________________________________________________
c64-dual sids, A1000, A1200-060@50, A4000-CSMKIII
Indivision AGA & Catweasel MK4+= Amazing
! My Master Miggies-Amiga 1000 & AmigaOne X1000 !
--- www.mancave-ramblings.blogspot.ca ---
  -AspireOS.com & Amikit- Amiga for your netbook-
***X1000- I BELIEVE *** :angel:
 

Offline duga

Re: X5000 Failing to Boot OS4!
« Reply #12 on: December 26, 2020, 08:10:16 PM »
Any difference if you choose VGA/DVI/HDMI over the other? In other words: tried all video outputs?
 

Offline AcillTopic starter

Re: X5000 Failing to Boot OS4!
« Reply #13 on: December 26, 2020, 08:20:00 PM »
Yup, doesnt matter what I use.
Proud Retired Navy Chief!

A4000T - CSPPC - Mediator
Powerbook G4 15", 17"
Powermac G5 2GHZ
AmigaOne X5000
Need Amiga recap or other services in the US? Visit my website at http://www.acill.com and take a look or on facebook at http://facebook.com/acillclassics
 

Offline AcillTopic starter

Re: X5000 Failing to Boot OS4!
« Reply #14 on: December 26, 2020, 08:35:30 PM »
U-Boot variables from serial out

X5000> printenv
amigaboot_quiet=Y
amigabootmenu_default=0
baudrate=115200
bdev=sda3
bootargs=root=/dev/sda2 mem=3500M console=ttyS0,115200 console=tty0
bootargs_live=root=/dev/ramdisk boot=casper mem=3500M ro --
bootargs_live_debug=root=/dev/ramdisk boot=casper mem=3500M ro break debug
bootcmd=setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr
bootdelay=10
bootdvd=scsi reset ; load scsi 0 2000000 boot_dvd ; bootm 2000000
bootfile=uImage
consoledev=ttyS0
eth1addr=00:80:10:11:07:08
ethact=FM1@DTSEC4
ethaddr=00:80:10:11:07:07
ethernetboot=echo Running Ethernet Boot
ethprime=FM1@DTSEC4
fdtaddr=c00000
fman_ucode=7fe733f0
harddiskboot=echo Running Hard Disk Boot
hwconfig=fsl_ddr:ctlr_intlv=cacheline,bank_intlv=cs0_cs1;usb1:dr_mode=host,phy_type=utmi;usb2:dr_mode=host,phy_type=utmi
linuxboot=echo Running Linux
liveusb=usb start ; setenv bootargs_live_debug ; ext2load usb 1:1 2000000 boot_dvd ; bootm 2000000
loadaddr=1000000
loadbmps=mmc read 0x10005000 0x500 0x200; mmc read 0x20000000 0x10000 0x20000
massboot=usb reset ; boota
mos=bootmorphos
netdev=eth0
nfsboot=setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr
opticalboot=echo Running Optical Boot
preboot=run loadbmps;bmp d 0x20000000;ami
ramboot=setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;tftp $ramdiskaddr $ramdiskfile;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr $ramdiskaddr $fdtaddr
ramdiskaddr=2000000
ramdiskfile=ramdisk.uboot
rootpath=/opt/nfsroot
scsidevs=1
stdin=usbkbd,serial
stdout=serial,vga
uboot=u-boot.bin
ubootaddr=0xFFF80000

Environment size: 1917/8188 bytes
Proud Retired Navy Chief!

A4000T - CSPPC - Mediator
Powerbook G4 15", 17"
Powermac G5 2GHZ
AmigaOne X5000
Need Amiga recap or other services in the US? Visit my website at http://www.acill.com and take a look or on facebook at http://facebook.com/acillclassics