Welcome, Guest. Please login or register.
Amiga Kit Amiga Store Iridium Banner AMIStore App Store A1200/A600 4xIDE Interface

AuthorTopic: Matzes a1k.org Graphics Adapter...  (Read 3596 times)

0 Members and 1 Guest are viewing this topic.

Offline giZmo350

Re: Matzes a1k.org Graphics Adapter...
« Reply #105 on: June 28, 2016, 04:53:30 PM »
@Rotzloeffel

O-M-G!!!! Thanks sooooo much! :)

I can't wait to get outta work and use this!!!!

giZmo
« Last Edit: June 28, 2016, 05:28:58 PM by gizmo350 »
A500: 2MB Chip, 8MB Fast, IndiECS, MiniMegi, IDE4ZorroII on Z-500, KS1.3/KS3.1, WB3.1&BWB
 
A2000HD: 2MB Chip, 128MB Fast, P5:Blizz 2060@50MHz, PCD-50B/4GBCF, XSurf100, RapidRoad, IndiECS, Matze RTG, MiniMegi, CD-RW, SunRize AD516, WB3.9
 
A1200: 2MB Chip, 64MB Fast, 4GBCF, GVP Typhoon 030 @40MHz w/FPU, Subway USB, EasyNet Ethernet, Indi AGA MKI, FastATA MK-IV, Internal Slim CD/DVD-RW, WB3.5

Surfing The Web With AMIGA Is Fun Again!
 

Offline Rotzloeffel

Re: Matzes a1k.org Graphics Adapter...
« Reply #106 on: June 29, 2016, 07:49:00 AM »
Quote from: gizmo350;810415
@Rotzloeffel

O-M-G!!!! Thanks sooooo much! :)

I can't wait to get outta work and use this!!!!

giZmo

Your welcome my friend.... let us know, how it works for you :)
Save Planet Earth! It is the only one in the galaxy with fresh and cold beer :laughing:
 

Offline 3246251196

Re: Matzes a1k.org Graphics Adapter...
« Reply #107 on: January 10, 2021, 04:30:56 AM »
Not sure why, but I always need to restart my machine for this to work. Granted this is in a sort of non-standard setup: A500 with aca 500 ++ (the checkmate case came with the zorro 2 board) so I bought this card. It is great, but trying to figure out why I need to restart.

Initially I will get a message that pops up very, very quickly. I am not sure how to log that or find the command that is being run to pipe the output to a file. I caught the message:
"check your picasso96 installation" etc /etc "Assuming GBAPI..."

When WB loads I don't see the board in Picasso96 and I cannot select any modes in the ScreenModes tool. But, restart, and it works fine.

- Installed picasso96 from Aminet,
- Installed the GBAPI drivers
- Changed the tooltype info of the Picollo 64 monitor BOARDTYPE=GBAPI++
******************