UAE on Windows can't see my Amiga drive

[tonyvdb]

So I'm trying to clone my Amiga drive using UAE on my windows 7 PC however the drive won't show up I've looked in the bios and the sata port that it's hooked to is on but says no drive present. UAE also can't see it.

[tonyvdb]

Thanks for the tips,
@Mike, i tried to do that however I cant seem to get both mu CF card and my IDE drive to show up at the same time to copy the files on my Amiga in OS3.1

@klesterjr & duce, I will look at that toninight. However when I go into the Drives section in UAE I can select all of the other devices that I have including my USB

[tonyvdb]

Yes, I used an IDE to SATA adapter. The drive spins up.

It works fine in the amiga so Im thinking it is a configuration issue. I will try changing the master slave jumper when I get home (it was set to master.)

[tonyvdb]

Ok, got the drive to work. However I had to use a different machine. So how can I copy the drive if I don't have the rom images installed on this PC? It won't start up because I don't have Amiga forever on this machine.
I can see the drive and I made an image of it on the hard drive.

[tonyvdb]

Ok, got everything to show up.

In win UAE how do you take the image of the original drive and copy it onto the CF card?
The CF card is already formatted with the Amiga I just want my old drive image to be copied onto the new 4gb CF card. The old hard drive is 2.9gb
I can see the CF card in UAE.