Welcome, Guest. Please login or register.
Amiga Kit Amiga Store Iridium Banner AMIStore App Store A1200/A600 4xIDE Interface

AuthorTopic: !200 out of range message on Flat panel  (Read 977 times)

0 Members and 1 Guest are viewing this topic.

Offline Xanaa

!200 out of range message on Flat panel
« on: November 06, 2008, 02:36:06 AM »
Hi,
I picked up a 1200  and finaly got a 500 power supply that works now. ( had some bad caps in power supply)
When I turn on computer I get out of range message on flat panel with the Commodore adapter from RGB to 15 pin adapter but if I use the 1084 everything works good.
Any ideas on this?
Thanks
 

Offline nine3o

Re: !200 out of range message on Flat panel
« Reply #1 on: November 06, 2008, 02:47:58 AM »
Hi Xanaa,

The C= RGB to 15 pin adapter is just a gender changer.  The only way you will get a picture on the LCD screen with this adapter is in workbench using the VGA monitor driver.  But again only in workbench will you see an image, games and early startup up menus will not display anything.

You will need a scandoubler or visit Red's store for an IndiVision AGA, or Amigakit.
A1200 with Blizzard 1230MKiV 64MB fast ram
 

Offline rkauer

Re: !200 out of range message on Flat panel
« Reply #2 on: November 06, 2008, 02:56:54 AM »
 Or, if your panel is 15kHz-able, you are using a 50Hz vertical refresh (PAL screen) with a LCD who does not support it.
Goodbye people.

I\'ll pop on from time to time, RL is acting up.