Welcome, Guest. Please login or register.
Amiga Kit Amiga Store Hollywood MAL AMIStore App Store A600 Memory

AuthorTopic: Info on the Cybervision64 loop cable...  (Read 831 times)

0 Members and 1 Guest are viewing this topic.

Offline keropi

Info on the Cybervision64 loop cable...
« on: November 29, 2006, 07:30:15 PM »
Does anyone know if the Cybervision64 loop cable (the one that connects the sd/ff to the cv64) has any special pinout? or is it a straight connection? (pin 1 on pin1 and so on...)
I need to make one because a cv64 I got did not had this cable, and I need to give info to amigakit to make it for me.

thank you for any info!  :-D

Offline sdyates

Re: Info on the Cybervision64 loop cable...
« Reply #1 on: November 29, 2006, 07:46:11 PM »
I was told that it was a regular cable that could be got at any video store. But, at the risk of blowing up a card, checking is the best thing. Did you check the online cybervision 64 manual?
1 x A500, Hi-toro 4000 :)
1 iMac OSx, 1 Mac Mini
1 Wintel 03 svr

http://www.RetroGameAndComputer.com
http://www.BassFishing-Gurus.com
 

Offline keropi

Re: Info on the Cybervision64 loop cable...
« Reply #2 on: November 29, 2006, 07:53:44 PM »
where is the manual???
sdyates, can you check your cable? it is easy to check it, provided u have a multimeter ...

Offline amiga92570

Re: Info on the Cybervision64 loop cable...
« Reply #3 on: November 29, 2006, 08:39:18 PM »
You can use any vga extention cable male to male. Short ones are hard to find however.  :-)
Amiga92570
==========================
(1) 4000T/040 (2)3000t CS 060/233ppc Picasso IV video, (2)D-box 1200 blizzard 060/200ppc Mediator fastATA, (1)amiga 1200 Power tower, (1)amiga 1200 EZ tower with mediator,1200/030/50mhz, (3) amiga 500 with CSA Mega Midget Racer and Trump card AT, (2) amiga 600 one with M-tec 030, (3) CD32 one sx32, two sx32-pro, More accessories and parts than I want to admit too.  :-o
 

Offline Chain

Re: Info on the Cybervision64 loop cable...
« Reply #4 on: November 29, 2006, 11:07:40 PM »
its straight cable, 1:1
ive shorted one standard vga cable for it :)
too lazy to use shift key properly...
 

Offline Tahoe

Re: Info on the Cybervision64 loop cable...
« Reply #5 on: November 30, 2006, 09:42:25 AM »
I can spare a short one; if you need it...
(as mentioned; they are standard VGA male-male cables)
Greetings from Wilnis, The Netherlands
Now owning ALL Amiga models and most; if not all; flavours of them...My Amiga Museum
 

Offline keropi

Re: Info on the Cybervision64 loop cable...
« Reply #6 on: November 30, 2006, 10:17:37 AM »
thank you amigos, I have placed an order with amigakit yesterday :-D