Welcome, Guest. Please login or register.

Author Topic: Updating Workbench 3.1  (Read 5267 times)

Description:

0 Members and 1 Guest are viewing this topic.

Offline giZmo350

  • Lifetime Member
  • Hero Member
  • *****
  • Join Date: Apr 2005
  • Posts: 2055
  • Country: 00
  • Thanked: 29 times
  • Gulfport, Miss
    • Show all replies
Re: Updating Workbench 3.1
« on: March 28, 2020, 02:13:48 AM »
Hi there sturulez...  Have you ever checked out Better Workbench? I was never too keen on these enhancement packages however, after doing some hardware upgrades to the A500 in my sig, I thought I would give BetterWB a try. I found it quit awesome! You can switch from the boring 3.1 icons to the newer glow icon set which is quit appealing to the eye. Not sure if it has a background utility. And it comes with a ton of enhancements and utilities that are very useful. Mostly the stuff you would spend a lot of time hunting down individually. It's also still maintained. It would look really good on an 1084S monitor too. You certainly have the horsepower to run it. Maybe give a try...   ;)

Here's a link and full description.....
http://lilliput.amiga-projects.net/BetterWB.htm

A500: 2MB Chip, 8MB Fast, IndiECS, MiniMegi, IDE4ZorroII on Z-500, KS1.3/KS3.1, WB3.1&BWB
 
A2000HD: 2MB Chip, 128MB Fast, P5:Blizz 2060@50MHz, PCD-50B/4GBCF, XSurf100, RapidRoad, IndiECS, Matze RTG, MiniMegi, CD-RW, SunRize AD516, WB3.9
 
A1200: 2MB Chip, 64MB Fast, 4GBCF, GVP Typhoon 030 @40MHz w/FPU, Subway USB, EasyNet Ethernet, Indi AGA MKI, FastATA MK-IV, Internal Slim CD/DVD-RW, WB3.5

Surfing The Web With AMIGA Is Fun Again!
 
The following users thanked this post: sturulez