« Reply #13 on: June 16, 2015, 09:22:35 PM »
Yes, the Flyer does use the drives differently but you can simply access those drives from the workbench screen once you put the drive devices into the dev drawer (FA1 FB2 etc...) They will show up on the workbench as drives (see my avatar for screen shot).
OK, Cool! I'll go that route then....
Your talking about that short ribbin cable that goes from the toaster card to the flyer card? or the big octapuse cable that goes from the flyer card to the drives? If its the later I have one I dont use.
Yes, I'm talking about the ribbon cable. But, actually I need the octopus cable too (maybe you would like to sell?). DiscreetFX told me they sent them but, Mmm, Huh, never got them.
« Last Edit: June 16, 2015, 09:40:37 PM by gizmo350 »
Logged
A500: 2MB Chip, 8MB Fast, IndiECS, MiniMegi, IDE4ZorroII on Z-500, KS1.3/KS3.1, WB3.1&BWB
A2000HD: 2MB Chip, 128MB Fast, P5:Blizz 2060@50MHz, PCD-50B/4GBCF, XSurf100, RapidRoad, IndiECS, Matze RTG, MiniMegi, CD-RW, SunRize AD516, WB3.9
A1200: 2MB Chip, 64MB Fast, 4GBCF, GVP Typhoon 030 @40MHz w/FPU, Subway USB, EasyNet Ethernet, Indi AGA MKI, FastATA MK-IV, Internal Slim CD/DVD-RW, WB3.5
Surfing The Web With AMIGA Is Fun Again!