Welcome, Guest. Please login or register.

 



Battery replacement (3/3)
Battery replacement (3/3)
Previous Image | Next Image
Description: This shows the CR-2032 battery holder soldered to the Amiga 2000 motherboard (v6.2) by only one of its two pins.  The two-pin spacing of the holder does not match the pin spacing of the removed NiCD rechargeable battery.  The non-soldered side of the holder could be secured to the board using something like superglue, if desired.  It is possible that a holder for a smaller battery would work, such as a CR-2016, but I have not investigate this.  As well, a holder with only two pins rather than three, which is the standard CR-2032 holder from Radio Shack, would work.
Picture Stats:
Views: 1054
Filesize: 463.5kB
Height: 768 Width: 1024
Posted by: LoadWB at October 31, 2010, 08:02:32 PM

Image Linking Codes
BB Code
0 Members and 1 Guest are viewing this picture.

Comments (0)



Powered by: SMF Gallery