|
A3000T blank Hard drive plates | ||
Previous Image | Next Image | ||
Description:
Picture Stats: Views: 1593 Filesize: 145.14kB Height: 768 Width: 1024 Posted by: tonyvdb at December 21, 2006, 05:23:43 AM Image Linking Codes
|
||
0 Members and 1 Guest are viewing this picture. |
X-ray Posts:4370 | December 23, 2006, 01:20:21 PM Thanks Tony! |
tonyvdb Posts:1121 | December 23, 2006, 03:32:43 AM Ok, here it is in mm: 150mm wide 42mm high 6mm plate depth 18mm tab from front to back 12mm tab sticks out on back |
X-ray Posts:4370 | December 22, 2006, 01:08:27 AM Tony, can we have that in mm please (to be accurate and sure). The A4000T plate measurements: Plate thickness: 6mm Plate width: 42mm Plate length: 148mm Tab length: 9mm (from the face) The tab therefore protrudes 3mm from the back of the plate |
tonyvdb Posts:1121 | December 22, 2006, 12:23:32 AM Well the plates are 3/4 of an inch deep from the front of the face to the end of the clip. They are just over 5&3/4" wide and just under 1&3/4" high. The A4000 blank did screw in but not the A3000T. |
Matt_H Posts:6411 | December 21, 2006, 10:14:09 PM Yeah, those do look more like 4000T plates than I remember. I always thought the 3000T's were mounted via screws... Guess not. :-) |
X-ray Posts:4370 | December 21, 2006, 11:35:42 AM Hmmm maybe those can also be used on an A4000T. We need to measure the tab heights and plate dimensions. |