Amiga 500/+ 2MB RAM expansion

[Tymo500]

If somebody could send full BOM list for this expansion RAM.
I see the RAM chips 514256 4-bit x 256K by Vitelic.
>2 x capacitors on board
>8 x little capacitors
>4 x SIL8/ RESISTOR ARRAYS

and connector , of course.


Board is without clock module for Amiga 500 /512Kb
This version fitted for A500+ 1 MB RAM Expansion.

This expansion board is probably manufactured by AlfaData.

[giobbi]

the caps close to the ICs usually are 100 nF (104). The resistor array should be 47 ohm (based on my RAM expansion). The electrolytic I don't know, but probably a 10 uF should be ok.