For sale : Builded 040/060 adapter

[Cosmos]

040/060 adapter for Amiga Classic

The superMatze version

Brand New, factory soldering

Tested on my world famous MK2@105, works fine

For A3640, WarpEngine, CyberStorm MK2, GVP cards...


- With an 68LC060, the adapter will work fine with Kick 3.0 & 3.1

- With a true 68060, the adapter will need a Kickstart with a special exec.library


For working, you must install the 68060.library v46.7 from Phase5 in Sys:Libs/
or the MMU package from Thor (on Aminet)



60 euros + 2 euros shipping EU Priority no tracking in friend/gift Paypal mode

or + 2.60 euros for WW

[Cosmos]

I'm interested in this adapter. I live in The Netherlands.

How much is it with tracking?

Registred/tracking is 6 €

[Cosmos]

Another question: I read about that the new kickstart ROMs from Cloanto has a new Exec.library. Has this ROMs have the right Exec.library?

Quote:

Kickstart 3.X (rev. 45.xx)
as used in Amiga Forever, builds on the original Kickstart 3.1 ROM components and features the following improvements: •Patches originally released under the ESCOM and Gateway Amiga ownership - no SetPatch or reboot required
•scsi.device and exec.library updates by Alexander Benedictov, Chris Hodges, Heinz Wrobel and Toni Wilen
•expansion.library fixes by Jeff Weeks
•FastFileSystem fixes by Etienne Vogt
•mathieeesingbas.library fixes by Harry "Piru" Sintonen
The scsi.device updates included in the 3.X ROM make it possible to boot from disks larger than 4 GB. Additional elements, such as FastFileSystem 45.9 and Installer 44.10, are included in the Classic Support Workbench 3.1 distribution, and complement the ROM-based enhancements.

Please note: In order to make room for the enhancements, the 3.X ROMs employ the same technique used by Commodore for the 4000T ROMs, i.e. ROM space was freed by moving workbench.library out of the ROM. This means that a Libs/workbench.library file must be present on the boot disk. (Cloanto's Classic Support Workbench 3.1 and Amiga OS 3.9 already include the required workbench.library.)

I'm not 100% sure, but no : the little FPU fix at the beginning of the exec.library is not included in this new version...

[Cosmos]

If you have an original Cyberstorm 060 MKII, can it be modified to work with this adapter
so you can use a rev6 060 at say 100MHz, with proper cooling?

Yes ===> http://warpclassic68k.blogspot.fr/2014/08/mk2-68060105-mhz.html

In this scenario, can you still use the SCSI adapter?
Is it only the CPU that would be running on 100MHz, while the memory and logic ++ will run at half this speed (50MHz)?

I guess yes. I will try today because I have now some Scsi drives at home...

You mention a modified exec.library in ROM, do you need to assemble a new kickstart,
and if yes, where can you get the modified exec.library?

Yes, you need a new Kickstart with this library into : http://cosmosunivers.free.fr/download/exec_4520b%28A4000%29.readme

[Cosmos]

Ok,

so:

- remove the 3,3V regulator
- jumper its output pad to 5V
- change the location of 2 resistors (where is this change described?)
- change the oscillator to 100MHz
- replace Amiga ROM with new one with special exec.library
- insert the adapter with rev6 68060 and cooler

and it is ready to go, or did I miss something?

Have you got more units for sale?

Yes

You have to put back your MK2 to his 040 state : http://leblogdecosmos.blogspot.fr/2011/01/mkii-040-060.html

I have only one adapter available !

I try to get the Scsi working, but no... I'm going to see the JMP documentation...

[Cosmos]

Adapters available with a new price : 55 € + shipping

[Cosmos]

Just to check, as cannot find the info anywhere.  Does this require a patched physical kickstart (ie, an EPROM) or can I softkick?

I have a 3640 I'd like to upgrade to an 060.

Softkick impossible, my dear Dan !!

You need my special exec flashed on 2 eproms !

I recommand you Romy to build an 1 Mb Kickstart 3.9, much better than the 3.1, really...

[Cosmos]

Can the adapter be installed in a A3000D?, the A3640 is unmodified...

I haven't been able to find any previous experiences, seems that all the people has A4000 machines

Hum... The floppy drive will be a problem...

[Cosmos]

Will that adapter work in a Blizz PPC?

I tried : no !

And no too on my MK3...

[Cosmos]

The adapter can be modified to remove the middle socket (but requires technical skill to do it successfully). Many people on Amibay have already done this:
!

Yes, I did it too here : and I put the regulator upside down...

[Cosmos]

Code: [Select]

WarpEngine 060@80

 BusSpeedTest 0.19 (mlelstv) Buffer: 262144 Bytes, Alignment: 32768
 ========================================================================
 memtype addr op cycle
 fast $08B48000 readw 51.2 ns norm 38.4 * 10^6 byte/s
 fast $08B48000 readl 89.0 ns norm 44.9 * 10^6 byte/s
 fast $08B48000 readm 88.6 ns norm 45.1 * 10^6 byte/s
 fast $08B48000 writew 70.3 ns norm 28.4 * 10^6 byte/s
 fast $08B48000 writel 141.2 ns norm 28.3 * 10^6 byte/s
 fast $08B48000 writem 142.1 ns norm 28.1 * 10^6 byte/s

 chip $00020000 readw 1052.2 ns norm 1.9 * 10^6 byte/s
 chip $00020000 readl 1050.6 ns norm 3.8 * 10^6 byte/s
 chip $00020000 readm 1051.3 ns norm 3.8 * 10^6 byte/s
 chip $00020000 writew 1039.4 ns norm 1.9 * 10^6 byte/s
 chip $00020000 writel 1038.0 ns norm 3.9 * 10^6 byte/s
 chip $00020000 writem 1041.5 ns norm 3.8 * 10^6 byte/s

Code: [Select]

Cyberstorm MK2 060@105

 BusSpeedTest 0.19 (mlelstv) Buffer: 262144 Bytes, Alignment: 32768
 ========================================================================
 memtype addr op cycle calib bandwidth
 fast $08C80000 readw 56.1 ns normal 35.6 * 10^6 byte/s
 fast $08C80000 readl 102.1 ns normal 39.2 * 10^6 byte/s
 fast $08C80000 readm 101.1 ns normal 39.6 * 10^6 byte/s
 fast $08C80000 writew 82.6 ns normal 24.2 * 10^6 byte/s
 fast $08C80000 writel 166.5 ns normal 24.0 * 10^6 byte/s
 fast $08C80000 writem 165.1 ns normal 24.2 * 10^6 byte/s

 chip $00018000 readw 766.5 ns normal 2.6 * 10^6 byte/s
 chip $00018000 readl 766.6 ns normal 5.2 * 10^6 byte/s
 chip $00018000 readm 767.1 ns normal 5.2 * 10^6 byte/s
 chip $00018000 writew 568.0 ns normal 3.5 * 10^6 byte/s
 chip $00018000 writel 569.4 ns normal 7.0 * 10^6 byte/s
 chip $00018000 writem 568.7 ns normal 7.0 * 10^6 byte/s

Code: [Select]

CyberStorm MK3 060@75

 BusSpeedTest 0.19 (mlelstv) Buffer: 262144 Bytes, Alignment: 32768
 ========================================================================
 memtype addr op cycle calib bandwidth
 fast $08638000 readw 34.5 ns normal 58.0 * 10^6 byte/s
 fast $08638000 readl 56.1 ns normal 71.2 * 10^6 byte/s
 fast $08638000 readm 55.7 ns normal 71.9 * 10^6 byte/s
 fast $08638000 writew 34.8 ns normal 57.5 * 10^6 byte/s
 fast $08638000 writel 68.4 ns normal 58.4 * 10^6 byte/s
 fast $08638000 writem 73.0 ns normal 54.8 * 10^6 byte/s

 chip $00020000 readw 862.0 ns normal 2.3 * 10^6 byte/s
 chip $00020000 readl 861.8 ns normal 4.6 * 10^6 byte/s
 chip $00020000 readm 862.1 ns normal 4.6 * 10^6 byte/s
 chip $00020000 writew 566.9 ns normal 3.5 * 10^6 byte/s
 chip $00020000 writel 567.9 ns normal 7.0 * 10^6 byte/s
 chip $00020000 writem 567.1 ns normal 7.1 * 10^6 byte/s

My strategy for saving the Classic was first to improve the actual and existing software & hardware : sadly, all the manufacturers refused to help in any ways...

[Cosmos]

Four adapters available !

55 € + 2 € shipping EU Priority no tracking in friend/gift Paypal mode

or + 2.60 € for WW

[Cosmos]

I wonder if this adapter would work on Fusion forty....?

Need to find someone for checking...

And for the GVP 040 too on Amiga 2000...

[Cosmos]

would it be possible to use a Deneb to store your modified exec? Itwould be easier for me than burning a new rom

Good question : theorically yes, need testing to be sure !

[Cosmos]

New price : 50 € including shipping WW in Priority no tracking

+ 5,50 € if you want registred/tracking

Only 5 adapters available !